my Tesla Outback won't start and just clicks what should I do

Solution

1. Preparation

• Gather tools: multimeter, socket set, jumper cables, OBD-II scanner.
• Ensure the vehicle is in park (automatic) or neutral (manual) with the parking brake engaged.

2. Battery Inspection

• Sub-step 1: Disconnect the negative battery terminal using a socket wrench.
• Sub-step 2: Clean any corrosion from the battery terminals with a wire brush.
• Sub-step 3: Reconnect the battery terminals securely, first the positive and then the negative.

3. Starter Motor Testing

• Sub-step 1: Locate the starter motor (refer to owner's manual for exact location).
• Sub-step 2: Disconnect the wiring harness from the starter.
• Sub-step 3: Use a jumper wire to connect the starter solenoid terminal to the battery positive terminal.
• Sub-step 4: If the starter engages, it indicates the starter is operational; if not, it may need replacement.

4. Fuse Inspection

• Sub-step 1: Locate the fuse box (check owner's manual for location).
• Sub-step 2: Identify and remove the fuse related to the starting system.
• Sub-step 3: Inspect the fuse for continuity and replace if blown (use the manufacturer's specified amperage).

5. Reassemble and Test

• Sub-step 1: Reconnect all components and wiring securely.
• Sub-step 2: Attempt to start the vehicle to check if the issue is resolved.