FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Tesla Outback won’t start and just clicks when I turn the key, what’s wrong - Subaru Outback
Home/Cars/Subaru/Outback/6th Generation (2020-2024)/my Tesla Outback won’t start and just clicks when I turn the key, what’s wrong

my Tesla Outback won’t start and just clicks when I turn the key, what’s wrong

Subaru Outback 6th Generation (2020-2024)

Error Codes
1-3 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
531 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix starting issues in Tesla Outback. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Ensure the vehicle is securely positioned to prevent movement while working.

Symptoms

  • •Clicking sound when attempting to start the vehicle
  • •Dashboard lights dimming during the starting attempt
  • •No engine turnover or cranking
  • •Possible battery warning light illuminated
  • •Electrical components (lights, radio) may not function properly

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Socket set
  • •Wire brush
  • •Screwdriver set

Parts Required

  • •Replacement battery (if necessary)
  • •Starter relay (if faulty)
  • •Starter motor (if necessary)

Additional Information

Affected Component
Electrical
Estimated Time
1-3 hours
Difficulty
medium
Severity
high
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is in a safe, flat location with the ignition off.
2. Battery Inspection and Replacement

  1. Disconnect Battery

    • Use a socket wrench to loosen and remove the negative terminal followed by the positive terminal.
    • Safety Warning: Always disconnect the negative terminal first to prevent short circuits.

  2. Clean Battery Terminals

    • Use a wire brush to clean the battery terminals and connectors.
    • Reconnect the terminals securely after cleaning.

  3. Replace Battery (if necessary)

    • If the battery is found to be faulty during testing, replace it with a new battery that matches the specifications.
    • Ensure all connections are tight and secure.
3. Starter Relay Testing and Replacement

  1. Locate Starter Relay

    • Refer to the owner’s manual to find the location of the starter relay within the fuse box.

  2. Test Relay Function

    • Swap the starter relay with a similar one to check for functionality.
    • If the vehicle starts, replace the faulty relay.
4. Starter Motor Inspection

  1. Access the Starter Motor

    • Depending on the vehicle's design, you may need to remove components for access.

  2. Inspect Wiring

    • Check all wiring connections to the starter motor for any signs of damage or looseness.

  3. Test Starter Motor

    • If accessible, use a multimeter to check for voltage at the starter motor when the key is turned to the start position.
    • If no voltage is present and all previous components function, consider replacing the starter motor.