FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to check Tesla Model 3 Original (2017-2023) for battery health issues - Tesla Model 3
Home/Cars/Tesla/Model 3/Highland (2024-present)/how to check Tesla Model 3 Original (2017-2023) for battery health issues

how to check Tesla Model 3 Original (2017-2023) for battery health issues

Tesla Model 3 Highland (2024-present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
555 words

Problem Statement

Learn how to check battery health issues in Tesla Model 3 (2017-2023). Step-by-step guide with symptoms, diagnostic steps, and solutions.

Affected Component
Electrical
Estimated Time
1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Always follow manufacturer guidelines when working with electric vehicle batteries.
  • •Disconnect power before performing any maintenance.

Symptoms

  • •Decreased driving range compared to when the vehicle was new
  • •Charging takes longer than usual
  • •Battery warning alerts on the dashboard
  • •Performance issues such as slower acceleration
  • •Frequent need to recharge, even with minimal use

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Tesla app
  • •Third-party diagnostic tool (if needed)

Parts Required

  • •None (unless battery replacement is deemed necessary)

Additional Information

Affected Component
Electrical
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
2 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: Tesla app, third-party diagnostic tool (if needed).
  • Ensure the vehicle is parked on a flat surface and turned off.
  • Have the owner’s manual available for reference.
2. Battery Capacity Check
  • Open the Tesla app and navigate to 'Battery' settings.
  • Compare the current capacity percentage to the original specifications (usually around 75-80% of original capacity is acceptable for 4-5 years of use).
  • If the capacity is significantly lower, consider it a potential issue that needs further investigation.
3. Charge Cycle Test
  • Fully charge the vehicle to 100%.
  • Note the time it takes to reach full charge from a low state (e.g., 10%).
  • If charging takes excessively long (beyond standard times indicated in the manual), this may indicate a battery health issue.
4. Diagnostic Tool Check
  • Connect the third-party diagnostic tool to the vehicle’s data port.
  • Access the battery health information and check for any fault codes or warning signs.
  • Make note of the state of health (SOH) and compare it with Tesla's specifications for the model.
5. BMS Log Inspection
  • Use the diagnostic tool to check BMS logs for any recorded errors.
  • Review any anomalies such as cell imbalances or temperature issues that could indicate battery health concerns.
6. Software Update Check
  • Navigate to the software section in the Tesla interface.
  • Ensure that the vehicle is up to date with the latest firmware.
  • If updates are available, install them as they may contain fixes for battery management.