how to clear Tesla Model 3 Original (2017-2023) error codes

Tesla Model 3 Highland (2024-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

412 words

Problem Statement

Learn how to clear error codes in Tesla Model 3 (2017-2023) with our step-by-step guide. Ensure optimal performance and reset alerts easily.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location while performing these procedures to avoid accidents.

Symptoms

•Check Engine light illuminated
•Warning messages displayed on the touchscreen
•Reduced vehicle performance
•Inability to access certain vehicle features
•Alerts related to battery or charging systems

Diagnostic Steps

1
Ensure the vehicle is in 'Park' mode.
2
Open the Tesla app or use the vehicle's touchscreen.
3
Navigate to the 'Service' menu on the touchscreen.
4
Select 'Reset All' or 'Clear Error Codes' option.
5
If applicable, confirm the action and wait for the process to complete.
6
Restart the vehicle by powering it off and then back on.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tesla smartphone app
•Touchscreen interface

Parts Required

•N/A (software-based procedure)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in 'Park' mode.
2
Open the Tesla app or use the vehicle's touchscreen.
3
Navigate to the 'Service' menu on the touchscreen.
4
Select 'Reset All' or 'Clear Error Codes' option.
5
If applicable, confirm the action and wait for the process to complete.
6
Restart the vehicle by powering it off and then back on.

Solution

1. Preparation

Ensure the vehicle is parked safely and in a well-ventilated area.
Have the Tesla app installed and logged in on your smartphone.

Turn on the vehicle and navigate to the main touchscreen interface.
Tap on the "Service" icon located at the bottom of the screen.

3. Clearing Error Codes

Within the Service menu, look for the option labeled “Clear Error Codes” or “Reset All”.
Tap on the option. If a confirmation prompt appears, acknowledge it to proceed.

4. Restarting the Vehicle

After clearing the codes, exit the Service menu.
To restart, press and hold the brake pedal, then press and hold the “Power Off” button on the touchscreen.
Wait for approximately 30 seconds, then press the brake pedal again to power the vehicle back on.