FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to clear the P0711 code on my Tesla Model 3 Original (2017-2023) - Tesla Model 3
Home/Cars/Tesla/Model 3/Highland (2024-present)/how to clear the P0711 code on my Tesla Model 3 Original (2017-2023)

how to clear the P0711 code on my Tesla Model 3 Original (2017-2023)

Tesla Model 3 Highland (2024-present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Error Code: P0711
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
488 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0711 transmission fluid temperature sensor issues in Tesla Model 3. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0711
Affected Component
Transmission
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems to prevent short circuits or electrical damage.
  • •Allow the vehicle to cool before working on the transmission to avoid burns.

Symptoms

  • •Check engine light illuminated
  • •Erratic shifting or transmission performance
  • •Transmission overheating warnings
  • •Poor fuel economy
  • •Reduced power during acceleration

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Multimeter
  • •Torque wrench

Parts Required

  • •Transmission fluid temperature sensor
  • •Transmission fluid (as specified by the manufacturer)

Additional Information

Error Code
P0711
Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
4 items
Parts Required
2 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts needed for the repair.
  • Disconnect the negative battery terminal to ensure safety during the repair.
2. Inspect and Replace Sensor
  1. Locate the Transmission Fluid Temperature Sensor:
    • Refer to the vehicle's service manual for the exact location.
  2. Remove the Wiring Harness:
    • Gently disconnect the wiring harness from the sensor without damaging it.
  3. Unbolt the Sensor:
    • Use a socket set to remove the bolts securing the sensor to the transmission.
  4. Install the New Sensor:
    • Position the new sensor in place and tighten the bolts to the manufacturer's specified torque (typically around 10-15 Nm, check the service manual for specifics).
  5. Reconnect the Wiring Harness:
    • Ensure the connector clicks into place securely.
3. Refill Transmission Fluid (if necessary)
  1. Check Fluid Level:
    • If the fluid was low, remove the fill plug and add the appropriate transmission fluid (refer to the owner’s manual for specifications).
  2. Reinstall Fill Plug:
    • Tighten the fill plug to the specified torque.
4. Clear the Error Code
  1. Reconnect the Battery:
    • Reattach the negative battery terminal and ensure it's secure.
  2. Use OBD-II Scanner:
    • Connect the scanner and select the option to clear error codes, confirming the P0711 code is no longer present.