how to diagnose P0300 misfire code on Tesla Model 3 Original (2017-2023)

Tesla Model 3 Highland (2024-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

Error Code: P0300

3 min read

441 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0300 engine misfire in Tesla Model 3 (2017-2023). Step-by-step guide with diagnostic procedures and repair instructions.

Error Code

P0300

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the high-voltage battery before performing any inspection or repair

Symptoms

•Check engine light illuminated
•Rough or unstable idle
•Loss of power during acceleration
•Increased vehicle emissions
•Reduced fuel efficiency

Diagnostic Steps

1
Scan for error codes using OBD-II scanner
2
Inspect battery state and charge level
3
Check for software updates
4
Examine individual battery modules for damage
5
Perform a visual inspection of electrical components
6
Test high-voltage connections for security and functionality

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Basic hand tools

Parts Required

•Replacement battery modules (if any are faulty)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: OBD-II scanner, multimeter, basic hand tools.
Ensure the vehicle is parked on a flat surface and set to park mode. Disconnect the high-voltage battery for safety.

2. Update Software

Connect the vehicle to Wi-Fi.
Access the vehicle's settings and check for software updates.
Follow on-screen prompts to download and install any available updates.

3. Inspect Battery Modules

Remove the access cover to the battery pack.
Using a multimeter, check the voltage of each battery module.
Look for any modules that show significant deviation in voltage compared to others; replace if necessary.

4. Reconnect Battery

Reconnect the high-voltage battery.
Ensure all connections are tight and secure.

5. Clear Error Codes

Use the OBD-II scanner to clear the P0300 code from the vehicle's computer.
Monitor the vehicle to see if the code reappears.