how to replace the windshield wipers on my Tesla Model 3 Original (2017-2023)

Tesla Model 3 Highland (2024-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

low

Severity

2 min read

382 words

Problem Statement

Step-by-step guide to replace windshield wipers on Tesla Model 3 (2017-2023). Learn symptoms, diagnostic steps, and installation instructions.

Affected Component

Body/Interior

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the wiper arms are secured and do not snap back onto the windshield, which could cause damage.

Symptoms

•Wipers leaving streaks on the windshield
•Wipers skipping or chattering during operation
•Wiper blades torn or damaged
•Wipers not making full contact with the windshield

Diagnostic Steps

1
Inspect the wiper blades for any visible damage or wear.
2
Test the wipers in various settings to determine effectiveness.
3
Check the wiper arm tension to ensure proper contact with the windshield.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Park the vehicle on a level surface and turn off the ignition.
•Ensure the windshield is clean and free of debris.

Parts Required

•New windshield wiper blades (specific to Tesla Model 3)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: None
Park the vehicle on a level surface and turn off the ignition.
Ensure the windshield is clean and free of debris.

2. Lift the Wiper Arms

Gently pull the wiper arm away from the windshield until it locks in an upright position.

3. Remove Old Wiper Blades

Locate the release tab on the wiper blade where it connects to the wiper arm.
Press the release tab and slide the blade downwards to detach it from the arm.
Repeat for the other wiper blade.

4. Install New Wiper Blades

Take the new wiper blade and align it with the wiper arm.
Slide the blade onto the arm until you hear a click indicating it is securely locked in place.
Ensure the blade is oriented correctly (the rubber edge should face the windshield).

5. Lower Wiper Arms

Carefully lower the wiper arms back onto the windshield, ensuring they are not under tension.