how to replace wiper blades on Tesla Model 3 Highland (2024-present)

Tesla Model 3 Highland (2024-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

446 words

Problem Statement

Step-by-step guide to replacing wiper blades on Tesla Model 3 Highland (2024-present). Learn symptoms, diagnostic steps, and tools required for a successful repair.

Affected Component

Body/Interior

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is off before working on the wipers to avoid accidental activation.

Symptoms

•Streaks or smears on the windshield during operation
•Noisy operation while using the wipers
•Wipers not making full contact with the glass
•Wipers skipping or jumping across the windshield
•Wiper rubber tearing or visibly damaged

Diagnostic Steps

1
Inspect the wiper blades for visible signs of wear or damage.
2
Check the wiper arm tension to ensure proper contact with the windshield.
3
Test the wiper operation to identify performance issues such as skipping or noise.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Flathead screwdriver
•Clean cloth

Parts Required

•New wiper blades (compatible with Tesla Model 3 Highland)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and parts: new wiper blades, flathead screwdriver (if needed), and a clean cloth.
Park the vehicle on a flat surface and turn off the ignition.

2. Lift the Wiper Arms

Gently lift the wiper arms away from the windshield until they lock in an upright position.
Ensure the arms are stable and won’t snap back down during the replacement.

3. Remove Old Wiper Blades

Locate the release tab on the wiper blade where it connects to the wiper arm.
Press the release tab and slide the wiper blade down the arm to detach it.
Repeat the process for the other wiper blade.

4. Install New Wiper Blades

Take the new wiper blade and slide it onto the wiper arm until you hear a click, indicating it is securely attached.
Ensure that the blade is positioned correctly with the rubber edge facing the windshield.
Repeat for the second wiper blade.

5. Lower Wiper Arms

Carefully lower the wiper arms back into their resting position on the windshield.
Check that the wipers are seated properly and are not obstructed.

6. Test Operation

Start the vehicle and activate the wipers to ensure they function correctly.
Observe for smooth operation and correct alignment against the windshield.