my Tesla Model 3 Original (2017-2023) is shaking at high speeds what's wrong

Tesla Model 3 Highland (2024-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

541 words

Problem Statement

Learn how to diagnose and fix shaking issues at high speeds in Tesla Model 3 (2017-2023). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely supported by jack stands before working underneath it.
•Disconnect the battery before working on electrical components related to the suspension.

Symptoms

•Vibrations or shaking felt in the steering wheel
•Uneven tire wear
•Noise from the tires or suspension at high speeds
•Pulling to one side while driving
•Increased steering effort or instability

Diagnostic Steps

1
Inspect tire pressure using a tire pressure gauge to ensure all tires are properly inflated.
2
Visually examine tires for signs of uneven wear, bulges, or damage.
3
Check wheel alignment using alignment equipment to verify if it is within specifications.
4
Inspect suspension components (shocks, struts, control arms) for wear or damage.
5
Perform a road test to assess if the shaking occurs at specific speeds or under certain conditions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Jack
•Jack stands
•Lug wrench
•Torque wrench
•Alignment equipment
•Socket set

Parts Required

•New tires
•Suspension components

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire pressure using a tire pressure gauge to ensure all tires are properly inflated.
2
Visually examine tires for signs of uneven wear, bulges, or damage.
3
Check wheel alignment using alignment equipment to verify if it is within specifications.
4
Inspect suspension components (shocks, struts, control arms) for wear or damage.
5
Perform a road test to assess if the shaking occurs at specific speeds or under certain conditions.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a flat surface and engage the parking brake.

2. Tire Inspection and Replacement

Tools Required: Tire pressure gauge, jack, jack stands, lug wrench, torque wrench.
Sub-steps:
1. Remove the wheel covers if applicable.
2. Loosen the lug nuts slightly while the vehicle is on the ground.
3. Use a jack to lift the vehicle and support it on jack stands.
4. Remove the lug nuts completely and take off the wheels.
5. Inspect tires for any visible damage or uneven wear. Replace tires if necessary, ensuring they are of the same size and type.
6. Reinstall wheels and hand-tighten lug nuts.
7. Lower the vehicle and torque the lug nuts to the manufacturer’s specifications (usually around 100-110 ft-lbs).

3. Wheel Alignment

Tools Required: Alignment equipment (typically available at service centers).
Sub-steps:
1. Take the vehicle to a professional alignment shop.
2. Follow the technician’s recommendations for alignment adjustments based on the readings.
3. Confirm that all settings are within manufacturer specifications.

4. Suspension Inspection and Repair

Tools Required: Socket set, torque wrench, possibly a spring compressor if strut replacement is needed.
Sub-steps:
1. Inspect all visible suspension components for wear, play, or damage.
2. Replace any worn or damaged components (such as struts, shocks, control arms) following the manufacturer's instructions.
3. Reassemble and torque all components to specifications.