why does my Tesla Model 3 Highland (2024-present) make a clicking noise when turning

Tesla Model 3 Highland (2024-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

481 words

Problem Statement

Learn how to diagnose and fix the clicking noise when turning in Tesla Model 3 Highland. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely lifted before working underneath.
•Disconnect the battery before performing any electrical work.

Symptoms

•Clicking noise when turning left or right
•Noise becomes more pronounced during tight turns
•Possible vibration felt in the steering wheel
•No visible damage to tires or wheel wells
•Check for any warning lights on the dashboard (e.g., traction control)

Diagnostic Steps

1
Inspect the front suspension components for wear or damage.
2
Check the CV joints for any signs of tearing or grease leakage.
3
Examine the wheel bearings for play or roughness.
4
Use an OBD-II scanner to check for any error codes related to the drivetrain or suspension.
5
Raise the vehicle and manually rotate the wheels to listen for abnormal noises.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Wheel chocks
•Socket set
•Torque wrench

Parts Required

•CV joint assembly (if damaged)
•Wheel bearing assembly (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the front suspension components for wear or damage.
2
Check the CV joints for any signs of tearing or grease leakage.
3
Examine the wheel bearings for play or roughness.
4
Use an OBD-II scanner to check for any error codes related to the drivetrain or suspension.
5
Raise the vehicle and manually rotate the wheels to listen for abnormal noises.

Solution

1. Preparation

Tools Required: Jack, jack stands, wheel chocks, socket set, torque wrench.
Ensure the vehicle is parked on a flat surface and the battery is turned off.

2. Inspect Suspension Components

Sub-steps:
1. Use a jack to lift the front of the vehicle and secure it with jack stands.
2. Visually inspect the control arms, bushings, and struts for any signs of wear or damage.
3. Wiggle the components to check for any excessive play or looseness.

3. Check CV Joints

Sub-steps:
1. Locate the drive axles and inspect the CV boots for cracks or tears.
2. If the boots are damaged, replace the CV joint assembly.
3. If intact, check the joint itself for smooth movement by rotating it back and forth.

4. Examine Wheel Bearings

Sub-steps:
1. Remove the front wheel using a socket set.
2. Check the wheel bearing for any play by wiggling the wheel side to side.
3. If play is detected, replace the wheel bearing assembly.

5. Reassemble and Test

Sub-steps:
1. Reinstall the wheel and lower the vehicle.
2. Torque the wheel bolts to the manufacturer’s specifications.
3. Test drive the vehicle to verify that the clicking noise has been resolved.