how to check tire pressure on Tesla Model S Plaid/Refresh (2021-present)

Tesla Model S Plaid/Refresh (2021-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

3 min read

415 words

Problem Statement

Learn how to check tire pressure on Tesla Model S Plaid/Refresh (2021-present). Step-by-step guide for accurate tire pressure maintenance.

Affected Component

Suspension

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked safely and securely before performing any checks or adjustments.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Uneven tire wear
•Reduced driving range
•Handling issues or decreased stability
•Increased road noise

Diagnostic Steps

1
Access the Tesla touchscreen interface.
2
Navigate to the 'Service' menu.
3
Select the 'Tire Pressure' option to display current tire pressures.
4
Compare displayed pressures with the recommended values found on the door jamb sticker.
5
If necessary, check each tire physically with a tire pressure gauge.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Digital tire pressure gauge
•Analog tire pressure gauge
•Air compressor

Parts Required

•None (unless valve caps are lost or damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Wait for the tires to be cold (ideally checked in the morning before driving).
Gather necessary tools: a reliable digital or analog tire pressure gauge.

2. Access Tire Pressure Information

Turn on the Tesla Model S Plaid by pressing the brake pedal.
On the touchscreen, tap on the "Service" menu.
Select "Tire Pressure" to view the pressure readings for all four tires.

3. Compare with Recommended Pressure

Locate the recommended tire pressure values on the driver’s side door jamb.
Compare the displayed tire pressures with the recommended values.
Identify any tires that require adjustment (under-inflated or over-inflated).

4. Adjust Tire Pressure

If a tire needs adjusting, remove the valve cap from the tire’s valve stem.
Use the tire pressure gauge to check the current pressure if not already displayed.
Inflate the tire to the recommended pressure using an air compressor.
If over-inflated, release some air until it reaches the recommended pressure.
Replace the valve cap securely after adjustment.