how to clear the "service required" message on Tesla Model S Plaid/Refresh (2021-present)

Tesla Model S Plaid/Refresh (2021-present)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

409 words

Problem Statement

Learn how to clear the service required message on Tesla Model S Plaid. Step-by-step guide with diagnostic procedures and reset instructions.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe location and parked before performing any resets.

Symptoms

•Service required message illuminated on the dashboard
•Potential reduction in vehicle performance
•Notifications for scheduled service maintenance
•Possible decreased battery efficiency

Diagnostic Steps

1
Access the vehicle's touchscreen to check for any diagnostic messages or alerts.
2
Navigate to the 'Service' menu in the settings to review the service history and alerts.
3
Use the Tesla mobile app to check for any reminders or notifications related to service.
4
Verify if any software updates are available for the vehicle.
5
Check for any active error codes that may indicate underlying issues needing resolution.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tesla mobile app
•Access to Wi-Fi

Parts Required

•None required for this procedure

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Access the vehicle's touchscreen to check for any diagnostic messages or alerts.
2
Navigate to the 'Service' menu in the settings to review the service history and alerts.
3
Use the Tesla mobile app to check for any reminders or notifications related to service.
4
Verify if any software updates are available for the vehicle.
5
Check for any active error codes that may indicate underlying issues needing resolution.

Solution

1. Preparation

Ensure the vehicle is in Park mode.
Have the vehicle's touchscreen ready for navigation.
Confirm that the vehicle is connected to Wi-Fi for any software updates.

2. Software Reset

Access Settings:
- Go to the "Controls" menu on the touchscreen.
- Select "Service" from the options.
Check for Updates:
- Tap on "Software" to check for available updates.
- If an update is available, follow the prompts to install it.
Reset the Service Message:
- After ensuring the software is up to date, return to the "Service" menu.
- Tap on “Clear Service Alerts” if available.
- Confirm the action when prompted.

3. Manual Reset (if applicable)

Power Cycle:
- Press and hold both scroll wheels on the steering wheel until the touchscreen resets.
- Wait for the Tesla logo to appear, indicating a reboot.
Verify Message Clearance:
- Once the system is back online, check the dashboard for the "service required" message.