how to fix P0011 code in Tesla Model S Original (2012-2020)

Learn how to diagnose and fix P0011 engine timing issue in Tesla Model S (2012-2020). Step-by-step guide with diagnostic procedures and repair instructions.

Solution

1. Preparation

• Gather tools and parts.
• Disconnect the negative battery cable to prevent electrical shorts.
• Ensure the engine is cool before starting work.

2. Replace Engine Oil and Filter

• Sub-steps:
  • Drain the engine oil using a wrench to remove the oil drain plug.
  • Replace the oil filter using an oil filter wrench.
  • Refill with manufacturer-recommended oil type and quantity.
• Tools Required: Oil drain pan, socket set, oil filter wrench.
• Safety Warnings: Oil may be hot; allow it to cool before draining.

3. Inspect and Replace the VVT Solenoid

• Sub-steps:
  • Locate the VVT solenoid (refer to the service manual for specific location).
  • Disconnect the electrical connector and remove the mounting bolts.
  • Install the new solenoid and reconnect the electrical connector.
• Tools Required: Socket set, torque wrench.
• Safety Warnings: Ensure the engine is off and cool.

4. Check and Replace Camshaft/Crankshaft Position Sensors (if necessary)

• Sub-steps:
  • Remove any components obstructing access to the sensors.
  • Disconnect the sensor connectors and remove the sensors.
  • Install new sensors and reconnect the wiring.
• Tools Required: Socket set, screwdrivers.
• Safety Warnings: Disconnect battery before handling electrical components.

5. Clear Codes and Test Drive

• Sub-steps:
  • Use the OBD-II scanner to clear the P0011 code.
  • Start the engine and monitor for any warning lights.
  • Take the vehicle for a test drive to verify proper operation.
• Tools Required: OBD-II scanner.