how to fix P0011 timing code in Tesla Model S Original (2012-2020)

Learn how to diagnose and fix P0011 camshaft timing issue in Tesla Model S (2012-2020). Step-by-step guide with diagnostic procedures and repair instructions.

Solution

1. Preparation

• Gather tools and parts needed for repair.
• Disconnect the vehicle battery to ensure safety.
• Allow the engine to cool down before starting work.

2. Change Engine Oil and Filter

• Sub-steps:

  1. Drain the engine oil by removing the oil drain plug.
  2. Replace the oil filter with a new one.
  3. Refill the engine with the manufacturer-recommended oil type (e.g., Tesla-approved synthetic oil).

• Tools Required:

  • Oil drain pan
  • Socket set
  • Oil filter wrench
  • Funnel

3. Inspect and Replace the VVT Solenoid

• Sub-steps:

  1. Remove any components obstructing access to the VVT solenoid.
  2. Disconnect the electrical connector from the solenoid.
  3. Remove the bolts securing the VVT solenoid and take it out.
  4. Install the new VVT solenoid and secure it with bolts.
  5. Reconnect the electrical connector.

• Tools Required:

  • Socket set
  • Torque wrench

4. Inspect and Adjust the Timing Chain/Belt

• Sub-steps:

  1. Remove the engine cover for access to the timing components.
  2. Align timing marks on the camshaft and crankshaft to ensure correct positioning.
  3. If misaligned, adjust the timing chain/belt tensioner or replace as necessary.
  4. Reinstall the engine cover.

• Tools Required:

  • Timing tool kit
  • Torque wrench

5. Test Camshaft Position Sensor

• Sub-steps:

  1. Disconnect the camshaft position sensor.
  2. Use a multimeter to test the sensor's resistance and output voltage.
  3. Replace the sensor if readings are outside of specifications.
  4. Reconnect the sensor.

• Tools Required:

  • Multimeter