FAULTBASE
Error CodesASKCars
© 2025 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
Home/Cars/Tesla/Model S/Plaid/Refresh (2021-present)/how to fix P0301 misfire code Tesla Model S Plaid/Refresh (2021-present)

how to fix P0301 misfire code Tesla Model S Plaid/Refresh (2021-present)

Tesla Model S Plaid/Refresh (2021-present)

Error Codes
Severity: highDifficulty: mediumError Code: P03012-4 hours
3 min read
600 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix P0301 cylinder 1 misfire in Tesla Model S Plaid. Step-by-step guide with diagnostic procedures and repair instructions.

Error Code
P0301
Affected Component
Engine
Estimated Time
2-4 hours

Safety Warnings

  • ⚠Disconnect the battery before working on electrical components.
  • ⚠Allow the engine to cool before opening any covers or components.

Symptoms

  • •Check engine light illuminated
  • •Rough idle at start-up
  • •Decreased acceleration performance
  • •Increased energy consumption
  • •Engine stalling during operation

Diagnostic Steps

  1. 1Scan the vehicle's onboard diagnostics using an OBD-II scanner to confirm the P0301 code.
  2. 2Inspect the high-voltage battery connections for tightness and signs of corrosion.
  3. 3Check the condition of the ignition coils and spark plugs for wear or damage.
  4. 4Verify the operation of the fuel injectors by testing their resistance and functionality.
  5. 5Perform a compression test on cylinder 1 to check for mechanical issues.
  6. 6Inspect the wiring harness and connectors related to cylinder 1 for damage or loose connections.

Solution

Solution

1. Preparation

  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a flat surface and the parking brake is engaged.
  • Disconnect the negative terminal of the battery to prevent electric shock.

2. Inspect and Replace Ignition Coil

  • Tools Required: Socket set, torque wrench, dielectric grease.
  • Remove the engine cover if applicable.
  • Disconnect the electrical connector from the ignition coil on cylinder 1.
  • Unscrew the mounting bolts of the ignition coil and carefully remove it from the spark plug.
  • Check the rubber boot for cracks or deterioration.
  • Apply a small amount of dielectric grease to the new ignition coil's connector.
  • Install the new ignition coil, tightening it to the manufacturer's specified torque.
  • Reconnect the electrical connector.

3. Inspect and Replace Spark Plug

  • Tools Required: Spark plug socket, torque wrench, gap gauge.
  • Remove the ignition coil (as described in Step 2) to access the spark plug.
  • Use a spark plug socket to unscrew and remove the old spark plug.
  • Check the spark plug for wear, carbon buildup, or damage.
  • Set the gap on the new spark plug according to manufacturer specifications.
  • Install the new spark plug, tightening it to the specified torque.
  • Reinstall the ignition coil.

4. Verify and Test Fuel Injector

  • Tools Required: Fuel injector tester, multimeter.
  • Connect the fuel injector tester to the fuel injector connector on cylinder 1.
  • Activate the tester to check for proper injector operation.
  • If the injector is faulty, replace it by disconnecting the electrical connector, unscrewing it, and installing a new one.

5. Reconnect Battery and Clear Codes

  • Reconnect the negative battery terminal.
  • Use the OBD-II scanner to clear the P0301 code.
  • Start the vehicle and allow it to reach operating temperature.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Spark plug socket
  • •Fuel injector tester
  • •Multimeter

Parts Required

  • •Ignition coil (for cylinder 1)
  • •Spark plug (for cylinder 1)
  • •Fuel injector (if needed)

Additional Information

Error Code
P0301
Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
6 items
Parts Required
3 items

Related Faults

  1. what should I do if my Tesla Model S Plaid/Refresh (2021-present) has a power loss

    Learn how to diagnose and fix power loss issues in Tesla Model S Plaid (2021-present). Step-by-step guide with symptoms, diagnostic steps, and solutions.

    Electrical6 symptoms

  2. why does my Tesla Model S Plaid/Refresh (2021-present) have delayed acceleration?

    Learn how to diagnose and fix delayed acceleration in Tesla Model S Plaid (2021-present). Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical5 symptoms

  3. my Tesla Model S has a burning smell when I brake what could it be

    Learn how to diagnose and fix the burning smell when braking in Tesla Model S. Step-by-step guide with diagnostic procedures and repair instructions.

    Brakes5 symptoms

  4. why does my Tesla Model S Plaid/Refresh (2021-present) have a hard time accelerating

    Learn how to diagnose and fix acceleration issues in Tesla Model S Plaid (2021-present). Step-by-step guide with symptoms, diagnostic steps, and solutions.

    Electrical6 symptoms

  5. why does my Tesla Model S Plaid/Refresh (2021-present) feel like it’s stalling

    Learn how to diagnose and fix stalling issues in Tesla Model S Plaid. Step-by-step guide with diagnostic procedures and repair instructions.

    Electrical5 symptoms

  6. why does my Tesla Model S battery drain overnight when parked

    Discover how to diagnose and resolve battery drain issues overnight in your Tesla Model S. Step-by-step guide with diagnostic procedures and solutions.

    Electrical5 symptoms

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation