how to reset the check engine light on Tesla Model S Plaid/Refresh (2021-present)

Tesla Model S Plaid/Refresh (2021-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

390 words

Problem Statement

Learn how to reset the check engine light on Tesla Model S Plaid/Refresh. Step-by-step guide with diagnostic procedures and solutions.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked in a safe area before performing resets.

Symptoms

•Check engine light illuminated
•Vehicle displaying error messages on the dashboard
•Reduced power or performance issues
•No specific driving issues may be present

Diagnostic Steps

1
Check for any active alerts in the vehicle’s interface.
2
Ensure that all doors, hood, and trunk are properly closed.
3
Use the Tesla app to check for any diagnostic alerts or notifications.
4
Perform a soft reset of the vehicle using the steering wheel controls.
5
If the warning persists, connect to Tesla's service via the app for further diagnostics.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tesla app (smartphone)

Parts Required

•None required for resetting the check engine light.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for any active alerts in the vehicle’s interface.
2
Ensure that all doors, hood, and trunk are properly closed.
3
Use the Tesla app to check for any diagnostic alerts or notifications.
4
Perform a soft reset of the vehicle using the steering wheel controls.
5
If the warning persists, connect to Tesla's service via the app for further diagnostics.

Solution

1. Preparation

Ensure the vehicle is in a safe location with adequate power.
Have the Tesla app installed and updated on your smartphone.

2. Soft Reset of the Vehicle

Perform Soft Reset:
- Press and hold both scroll wheels on the steering wheel until the screen goes blank (approximately 10 seconds).
- Wait for the Tesla logo to appear on the screen, indicating the reset process has started.

3. Clear Alerts via Tesla App

Open Tesla App:
- Navigate to the 'Service' section within the app.
- Check for any alerts related to the check engine light.
Clear Alerts:
- Follow any prompts to reset or clear alerts if available.

4. Verify Check Engine Light Status

Check Dashboard:
- After the soft reset and app checks, observe the dashboard for the check engine light status.
- If the light remains illuminated, further diagnosis may be required.