how to reset the tire pressure warning light on my Tesla Model S Plaid/Refresh (2021-present)

Tesla Model S Plaid/Refresh (2021-present)

Error Codes

15-30 minutes

Time

easy

Difficulty

medium

Severity

2 min read

384 words

Problem Statement

Learn how to reset the tire pressure warning light on your Tesla Model S Plaid. Step-by-step guide to ensure accurate tire pressure readings.

Affected Component

Electrical

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked safely and securely before performing any adjustments.

Symptoms

•Tire pressure warning light illuminated on the dashboard
•Possible alerts on the touchscreen regarding tire pressure status
•Incorrect tire pressure readings displayed on the vehicle interface

Diagnostic Steps

1
Confirm all tires are inflated to the recommended pressure as indicated on the driver’s side door jamb.
2
Check for any visible damage to the tires or tire pressure monitoring system (TPMS) sensors.
3
Use the Tesla touchscreen to navigate to the tire pressure settings and verify current readings.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No specific tools are required for the reset process.

Parts Required

•No parts are required unless sensors need replacement.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Check that all tires are properly inflated to the recommended PSI.

2. Access the Vehicle Settings

Sit in the driver's seat and ensure the vehicle is powered on.
Tap on the "Controls" icon on the bottom corner of the touchscreen.

3. Navigate to Tire Pressure Settings

Select "Service" from the menu.
Tap on "Tire Pressure" to access the tire pressure monitoring settings.

4. Reset the Tire Pressure Monitoring System

Once in the Tire Pressure menu, look for the option to recalibrate or reset the TPMS.
Tap the “Reset” button to initiate the tire pressure warning light reset.

5. Confirmation

After the reset, the tire pressure warning light should turn off.
Drive the vehicle for a short distance to confirm that the warning light remains off.