how to reset the traction control on Tesla Model S Plaid/Refresh (2021-present)

Tesla Model S Plaid/Refresh (2021-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

medium

Severity

2 min read

384 words

Problem Statement

Learn how to reset the traction control system on your Tesla Model S Plaid (2021-present). Step-by-step guide with diagnostic procedures and solutions.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is stationary and secure before performing any resets.

Symptoms

•Traction control warning light illuminated on the dashboard
•Vehicle experiencing reduced power or performance
•System not responding to driving conditions properly
•Inability to enable or disable traction control via settings

Diagnostic Steps

1
Check for any current alerts or error messages on the vehicle's touchscreen.
2
Verify if the traction control is active by attempting to accelerate on a slippery surface.
3
Inspect the settings in the vehicle menu to see if traction control is manually disabled.
4
Perform a soft reset of the vehicle's systems by holding down the scroll wheels.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•No specific tools required for the reset process.

Parts Required

•No replacement parts needed for resetting traction control.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for any current alerts or error messages on the vehicle's touchscreen.
2
Verify if the traction control is active by attempting to accelerate on a slippery surface.
3
Inspect the settings in the vehicle menu to see if traction control is manually disabled.
4
Perform a soft reset of the vehicle's systems by holding down the scroll wheels.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Make sure the vehicle is in "Park" mode.
Have the vehicle's key fob or phone nearby for access.

2. Soft Reset of the Touchscreen

Press and hold both scroll wheels on the steering wheel for about 10 seconds.
Wait for the touchscreen to reboot; this will refresh the system.
Release the scroll wheels once the Tesla logo appears.

3. Check and Adjust Traction Control Settings

On the touchscreen, navigate to the "Controls" menu.
Select "Driving" from the options.
Ensure that the "Slip Start" is set to "Off" for normal traction control operation.
If needed, toggle the "Traction Control" setting to reset its state.