FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Tesla Model S Plaid/Refresh (2021-present) make a hissing sound when turning - Tesla Model S
Home/Cars/Tesla/Model S/Plaid/Refresh (2021-present)/why does my Tesla Model S Plaid/Refresh (2021-present) make a hissing sound when turning

why does my Tesla Model S Plaid/Refresh (2021-present) make a hissing sound when turning

Tesla Model S Plaid/Refresh (2021-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
489 words

Problem Statement

Learn how to diagnose and fix the hissing sound when turning in Tesla Model S Plaid. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Steering
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems.
  • •Ensure the vehicle is securely supported on jack stands before working underneath.

Symptoms

  • •Hissing noise during left or right turns
  • •Possible intermittent loss of steering assist
  • •Increased steering effort required
  • •No warning lights illuminated on the dashboard
  • •Possible fluid leaks in the engine bay or undercarriage

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Fluid siphon
  • •Jack
  • •Jack stands

Parts Required

  • •Power steering fluid

Additional Information

Affected Component
Steering
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Park the vehicle on a flat surface and engage the parking brake.
  • Disconnect the 12V battery to ensure safety.
2. Inspect Power Steering Fluid
  • Locate the power steering fluid reservoir.
  • Remove the cap and check the fluid level; if low, top off with manufacturer-recommended fluid.
  • Inspect the fluid for contamination (milky appearance indicates water ingress).
3. Check for Leaks
  • Visually inspect the power steering pump and associated hoses for any signs of leaks.
  • Clean the area around the power steering pump and hoses, then recheck after operating the vehicle to identify any new leaks.
4. Inspect Suspension Components
  • Raise the front of the vehicle using a jack and secure it with jack stands.
  • Check control arms, tie rods, and bushings for wear or damage.
  • Replace any worn components as necessary.
5. Reconnect Battery and Test Drive
  • Reconnect the 12V battery.
  • Start the vehicle and turn the steering wheel from lock to lock while stationary to check for noise.
  • Test drive the vehicle to confirm the noise is resolved during turns.