how to fix my Tesla Model Y Current (2020-present) key fob not working

Tesla Model Y Current (2020-present)

Error Codes

30-60 minutes

Time

medium

Difficulty

high

Severity

3 min read

478 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to troubleshoot and fix a non-working key fob for your Tesla Model Y. Step-by-step guide with diagnostic steps and repair instructions.

Affected Component

Electrical

Estimated Time

30-60 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is parked securely before beginning work on the key fob.

Symptoms

•Key fob not detected by the vehicle
•Inability to unlock or lock the doors remotely
•Vehicle does not start when key fob is inside
•Key fob buttons unresponsive
•Warning message on the vehicle display regarding key fob

Diagnostic Steps

1
Check the battery level of the key fob.
2
Replace the key fob battery if low or dead.
3
Ensure the key fob is within range of the vehicle.
4
Attempt to re-pair the key fob with the vehicle via the Tesla app.
5
Inspect the key fob for physical damage or water exposure.
6
Scan the vehicle for error codes related to the keyless entry system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small flathead screwdriver
•Replacement battery (CR2032)

Parts Required

•Key fob battery (CR2032)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the battery level of the key fob.
2
Replace the key fob battery if low or dead.
3
Ensure the key fob is within range of the vehicle.
4
Attempt to re-pair the key fob with the vehicle via the Tesla app.
5
Inspect the key fob for physical damage or water exposure.
6
Scan the vehicle for error codes related to the keyless entry system.

Solution

1. Preparation

Tools Required: Small flathead screwdriver, replacement battery (CR2032).
Ensure the vehicle is parked in a secure location.

2. Replace the Key Fob Battery

Open the Key Fob:
- Use the small flathead screwdriver to gently pry open the key fob along the seam.
- Be careful not to damage the casing.
Remove the Old Battery:
- Take note of the battery orientation (positive side facing up).
- Carefully remove the old battery using the screwdriver or your fingers.
Install the New Battery:
- Insert the new CR2032 battery in the same orientation as the old one.
- Ensure it is seated properly in the battery compartment.
Reassemble the Key Fob:
- Align the two halves of the key fob and press them together until they snap securely in place.

3. Re-pair the Key Fob

Access the Vehicle Settings:
- Inside the vehicle, go to "Controls" on the touchscreen.
- Select "Locks" and then "Key Fob".
Add the Key Fob:
- Follow the on-screen instructions to add the key fob back to the system.
- Make sure to have the key fob inside the vehicle during this process.

4. Test the Key Fob

After re-pairing, check the functionality by attempting to lock and unlock the doors, and start the vehicle.