FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix my Tesla Model Y power windows that won't roll up or down? - Tesla Model Y
Home/Cars/Tesla/Model Y/Current (2020-present)/how to fix my Tesla Model Y power windows that won't roll up or down?

how to fix my Tesla Model Y power windows that won't roll up or down?

Tesla Model Y Current (2020-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
550 words

Problem Statement

Learn how to diagnose and fix unresponsive power windows in Tesla Model Y. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components to avoid shorts.
  • •Allow the vehicle to cool before handling any components that may have been exposed to heat.

Symptoms

  • •Power window switch does not respond when pressed
  • •Windows remain in the fully open or closed position
  • •No sound of the window motor engaging
  • •Other electrical components function normally
  • •No warning lights related to windows on the dashboard

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Screwdriver set (Torx and Phillips)
  • •Pliers
  • •Trim removal tool

Parts Required

  • •Power window fuse (if blown)
  • •Window switch (if faulty)
  • •Window motor (if defective)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is in a safe environment and powered off.
  • Disconnect the 12V battery to prevent any electrical shorts.

Tools Required:

  • Multimeter
  • Screwdriver set (Torx and Phillips)
  • Pliers
  • Trim removal tool
2. Check and Replace Fuse
  • Locate the fuse box, which is usually found under the dashboard or in the trunk.
  • Identify the power window fuse using the fuse diagram.
  • Remove the fuse and check for continuity using a multimeter.
  • If the fuse is blown, replace it with one of the same amperage.
3. Inspect the Window Switch
  • Remove the door panel using a trim removal tool and screwdriver.
  • Disconnect the window switch connector and inspect for damage or corrosion.
  • Test the switch using a multimeter to check for continuity when pressed.
  • If faulty, replace the window switch with a new one.
4. Test the Window Motor
  • Access the window motor by removing the door panel.
  • Disconnect the motor connector.
  • Using a multimeter, confirm that power is reaching the motor when the switch is pressed.
  • If there is no power, trace back to the wiring harness for issues. If powered, replace the window motor.
5. Check Wiring Connections
  • Inspect the wiring harness for signs of wear, damage, or corrosion.
  • Repair or replace any damaged wiring connectors.
  • Reconnect all wiring and ensure they are secured properly.
6. Reassemble and Test
  • Reattach the door panel securely.
  • Reconnect the 12V battery.
  • Test the window operation using the power window switch.