FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix the electric power steering issue in my Toyota Camry Seventh Generation (2012-2017) - Toyota Camry
Home/Cars/Toyota/Camry/Seventh Generation (2012-2017)/how to fix the electric power steering issue in my Toyota Camry Seventh Generation (2012-2017)

how to fix the electric power steering issue in my Toyota Camry Seventh Generation (2012-2017)

Toyota Camry Seventh Generation (2012-2017)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
591 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix electric power steering issues in Toyota Camry (2012-2017). Step-by-step guide with symptoms, diagnostics, and repair instructions.

Affected Component
Steering
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before opening any components.

Symptoms

  • •Steering wheel feels heavy or difficult to turn
  • •Steering wheel vibrations or shaking
  • •Illuminated power steering warning light on the dashboard
  • •Unusual noises when turning the steering wheel
  • •Steering assist intermittently cuts out

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Socket set
  • •Screwdriver set
  • •Torque wrench
  • •Fluid siphon
  • •Funnel

Parts Required

  • •Power steering fluid
  • •Power steering motor (if replacement is necessary)
  • •Electrical connectors (if damaged)

Additional Information

Affected Component
Steering
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
7 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the ignition is off.
  • Disconnect the battery terminals to prevent electrical shorts.
2. Inspect and Replace Power Steering Fluid
  • Sub-steps:
    • Locate the power steering reservoir and check the fluid level.
    • If the fluid is low, fill it with the recommended power steering fluid (refer to the owner's manual for specifications).
    • If the fluid is dirty or contaminated, drain the reservoir and replace it with fresh fluid.
  • Tools Required: Fluid siphon, funnel.
3. Check Electrical Connections
  • Sub-steps:
    • Remove the cover panel under the steering column to access the power steering wiring harness.
    • Inspect the connectors for signs of corrosion or damage; clean or replace as necessary.
    • Ensure all connections are secure and properly seated.
  • Tools Required: Screwdriver set.
4. Test and Replace Power Steering Motor (if necessary)
  • Sub-steps:
    • If the motor did not receive the correct voltage during testing, remove the power steering motor assembly.
    • Disconnect the wiring harness and remove mounting bolts.
    • Install the new motor by reversing the removal process, ensuring all connections are secure.
  • Tools Required: Socket set, torque wrench.
5. Reconnect Battery and Test
  • Sub-steps:
    • Reconnect the battery terminals.
    • Start the vehicle and check for any warning lights; turn the steering wheel to test for assist.
    • If issues persist, consider further diagnostics or professional help.
  • Safety Warnings: Ensure the vehicle is off when working on electrical components.