how to fix the sunroof not closing properly on Toyota Camry Seventh Generation (2012-2017)

Solution

1. Preparation

• Gather tools needed: flathead screwdriver, Phillips screwdriver, multimeter, lubricant (silicone spray), and a replacement sunroof motor (if necessary).
• Disconnect the vehicle battery to ensure safety while working on electrical components.

2. Remove the Headliner

• Carefully pry off any trim panels around the sunroof using a flathead screwdriver.
• Remove screws securing the headliner panel and gently lower it without damaging the clips.
• Ensure you have enough clearance to access the sunroof motor and mechanism.

3. Inspect and Clean the Sunroof Track

• Visually inspect the sunroof track for debris or blockages.
• Use a soft cloth to clean the sunroof track thoroughly.
• Apply a silicone-based lubricant to the tracks to ensure smooth operation.

4. Test and Replace the Sunroof Motor

• Using a multimeter, check the voltage at the sunroof motor connector while operating the switch.
• If the motor does not receive power, inspect the wiring harness.
• If the motor is faulty, disconnect it and remove the screws securing it in place.
• Install the new motor by reversing the removal steps and reconnect the wiring harness.

5. Reassemble the Headliner

• Carefully reattach the headliner and secure it with screws.
• Reinstall trim panels around the sunroof and ensure they are clipped in properly.