how to fix Toyota Camry Seventh Generation (2012-2017) rearview camera not working

Solution

1. Preparation

• Gather necessary tools and replacement parts.
• Disconnect the negative battery terminal to prevent electrical shock.
• Ensure the vehicle is parked on a level surface with the ignition off.

2. Inspect and Clean Camera

• Locate the rearview camera mounted above the license plate.
• Clean the camera lens using a soft cloth and appropriate lens cleaner.
• Check for any physical damage to the camera housing.

3. Check and Replace Fuse

• Locate the fuse box (usually under the dashboard or hood).
• Identify the fuse associated with the rearview camera (refer to the owner's manual).
• Remove the fuse using a fuse puller and inspect it for continuity.
• Replace the fuse if it is blown with one of the same amperage.

4. Inspect Wiring and Connectors

• Remove the rear panel or trim covering the camera wiring.
• Visually inspect the wiring harness for any cuts, frays, or corrosion.
• Disconnect and reconnect any connectors to ensure a solid connection.

5. Test Rearview Camera

• Reconnect the negative battery terminal.
• Shift the vehicle into reverse and check if the camera activates.
• If the camera still does not work, consider replacing the camera unit.

6. Replace Rearview Camera (if necessary)

• Disconnect the wiring harness from the camera.
• Remove the camera mounting screws and carefully pull the camera from its housing.
• Install the new camera by reversing the removal steps and reconnecting the wiring harness.