FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Camry Seventh Generation (2012-2017) - Toyota Camry
Home/Cars/Toyota/Camry/Seventh Generation (2012-2017)/how to reset the maintenance light on my Toyota Camry Seventh Generation (2012-2017)

how to reset the maintenance light on my Toyota Camry Seventh Generation (2012-2017)

Toyota Camry Seventh Generation (2012-2017)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
404 words

Problem Statement

Learn how to reset the maintenance light on your 2012-2017 Toyota Camry. Step-by-step guide to ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is stationary and in a safe location while performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder notification for scheduled maintenance
  • •Vehicle displays maintenance required message

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Pen or pencil (optional for pressing the trip meter reset button)

Parts Required

  • •No parts are needed for resetting the maintenance light.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked on a level surface.
  • Gather necessary tools, such as a pen or pencil to press the trip meter reset button if needed.
2. Reset Maintenance Light

  1. Turn Ignition On

    • Insert the key and turn it to the "ON" position without starting the engine.

  2. Set Odometer to Trip A

    • Locate the trip meter reset button on the instrument cluster.
    • Press the button until the display shows "Trip A."

  3. Turn Ignition Off

    • Turn the ignition switch to the "OFF" position to prepare for the reset.

  4. Hold Trip Meter Reset Button

    • While holding down the trip meter reset button, turn the ignition back to the "ON" position.

  5. Complete the Reset

    • Continue to hold the button until the maintenance light blinks and then turns off, indicating successful reset.