FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on my Toyota Camry Seventh Generation (2012-2017) - Toyota Camry
Home/Cars/Toyota/Camry/Seventh Generation (2012-2017)/how to reset the maintenance light on my Toyota Camry Seventh Generation (2012-2017)

how to reset the maintenance light on my Toyota Camry Seventh Generation (2012-2017)

Toyota Camry Seventh Generation (2012-2017)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
337 words

Problem Statement

Learn how to reset the maintenance light on your 2012-2017 Toyota Camry. Step-by-step instructions for a quick and easy reset.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe and stable position during the procedure.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •No performance issues or malfunctions present

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this procedure.
  • Ensure the vehicle is parked safely with the ignition off.
2. Resetting the Maintenance Light
  1. Position the Vehicle: Ensure the car is parked with the gear in "Park" or "Neutral" and the engine off.
  2. Press the Trip Meter Reset Button: Locate the trip meter reset button on the instrument cluster, typically located near the odometer.
  3. Turn Ignition to ON: Turn the ignition key to the "ON" position (do not start the engine) while continuing to hold down the trip meter reset button.
  4. Hold Until Light Resets: Keep holding the button until the maintenance light begins to flash and then goes off. This usually takes about 10 seconds.
  5. Release the Button: Once the maintenance light is off, release the trip meter reset button.