FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Camry Seventh Generation (2012-2017) - Toyota Camry
Home/Cars/Toyota/Camry/Seventh Generation (2012-2017)/how to reset the maintenance light on Toyota Camry Seventh Generation (2012-2017)

how to reset the maintenance light on Toyota Camry Seventh Generation (2012-2017)

Toyota Camry Seventh Generation (2012-2017)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
399 words

Problem Statement

Learn how to reset the maintenance light on a 2012-2017 Toyota Camry with this step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a secure location before performing the reset.

Symptoms

  • •Maintenance light is illuminated on the dashboard
  • •Possible message indicating 'Maintenance Required' on the display
  • •No impact on vehicle performance; light is purely informational

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Ignition key

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools:
    • Ignition key
  • Ensure the vehicle is parked safely with the ignition in the OFF position.
2. Reset Maintenance Light
  1. Insert the ignition key into the ignition slot.
  2. Turn the key to the "ON" position (do not start the engine).
  3. Locate the odometer reset button on the dashboard, typically near the speedometer.
  4. Press and hold the odometer reset button.
  5. While holding the button, turn the ignition key to the "OFF" position.
  6. Continue holding the odometer reset button and turn the key back to the "ON" position.
  7. Keep holding the button until the maintenance light starts blinking and then goes out, which typically takes about 10 seconds.
  8. Release the odometer reset button.
  9. Turn the ignition back to the "OFF" position and then start the engine to confirm the maintenance light is off.