FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Camry Seventh Generation (2012-2017) - Toyota Camry
Home/Cars/Toyota/Camry/Seventh Generation (2012-2017)/how to reset the maintenance light on Toyota Camry Seventh Generation (2012-2017)

how to reset the maintenance light on Toyota Camry Seventh Generation (2012-2017)

Toyota Camry Seventh Generation (2012-2017)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
375 words

Problem Statement

Learn how to reset the maintenance light on your 2012-2017 Toyota Camry with this step-by-step guide. Quick and easy procedure to follow.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' or 'Neutral' and on a level surface before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Service reminder notification displayed
  • •No engine performance issues

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None (manual reset procedure)

Parts Required

  • •None (no parts needed for reset)

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked safely with the ignition off.
  • Gather necessary tools (if any).
2. Resetting the Maintenance Light

  1. Access the Odometer Button

    • Locate the odometer trip/reset button on the instrument panel.

  2. Press and Hold the Button

    • Press and hold the odometer trip/reset button firmly.

  3. Turn Ignition to "ON"

    • While still holding the button, turn the ignition key to the "ON" position without starting the engine.
    • Make sure all dashboard lights illuminate.

  4. Wait for the Light to Reset

    • Keep holding the button until the maintenance light begins to flash and eventually turns off.

  5. Turn Ignition Off

    • Release the odometer button and turn the ignition back to the "OFF" position.

  6. Confirm Reset

    • Start the vehicle to ensure the maintenance light remains off.