FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I diagnose a faulty throttle position sensor in a 2023 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How can I diagnose a faulty throttle position sensor in a 2023 Toyota Camry?

How can I diagnose a faulty throttle position sensor in a 2023 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
647 words

Problem Statement

Learn how to diagnose and replace a faulty throttle position sensor (TPS) in a 2023 Toyota Camry with step-by-step instructions and required tools.

Affected Component
Throttle Position Sensor
Estimated Time
2 hours

Symptoms

  • •Check Engine Light (CEL)
  • •Poor Acceleration
  • •Stalling
  • •Unstable Idle
  • •Increased Fuel Consumption
  • •Cruise Control Malfunction

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •OBD-II Scanner
  • •Torque wrench
  • •Screwdriver set
  • •Wire connectors

Additional Information

Affected Component
Throttle Position Sensor
Estimated Time
2 hours
Difficulty
medium
Severity
medium
Tools Required
5 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Diagnosing a Faulty Throttle Position Sensor (TPS) in a 2023 Toyota Camry

Step 1: Initial Inspection

  1. Visual Inspection: Check for any visible damage to the TPS and its wiring harness.
  2. Scan for Diagnostic Trouble Codes (DTCs): Use an OBD-II scanner to check for any codes related to the throttle position sensor. Common codes include:
    • P0120: Throttle/Pedal Position Sensor A Circuit
    • P0121: Throttle/Pedal Position Sensor A Range/Performance Problem
    • P0122: Throttle/Pedal Position Sensor A Circuit Low
    • P0123: Throttle/Pedal Position Sensor A Circuit High

Step 2: Electrical Testing

  1. Gather Tools:

    • Multimeter
    • OBD-II Scanner
    • Torque wrench (if needed for reinstallation)
    • Screwdriver set
    • Wire connectors (if repair is needed)

  2. Disconnect the Battery: Before working on any electrical components, disconnect the negative terminal of the battery.

  3. Locate the TPS: The throttle position sensor is typically located on the throttle body of the engine.

  4. Check Voltage Supply:

    • Reconnect the battery and turn the ignition to the 'ON' position without starting the engine.
    • Using a multimeter, measure the voltage at the TPS connector:
      • Reference Voltage: Typically around 5V (check your service manual for specifics).
      • If you do not have the reference voltage, check the wiring back to the ECU for continuity and issues.

  5. Check Signal Voltage:

    • With the engine running, measure the output voltage at the TPS:
      • Slowly depress the accelerator pedal.
      • The voltage should change smoothly (typically from 0.5V to around 4.5V).
      • If the voltage is erratic or does not fall within this range, the TPS may be faulty.

Step 3: Resistance Testing (if applicable)

  1. Measure Sensor Resistance:
    • Disconnect the TPS connector.
    • Use a multimeter to measure the resistance across the sensor terminals while moving the throttle plate by hand.
    • The resistance should change smoothly and consistently without any drops or spikes.
Step 4: Final Assessment
  1. Replace TPS: If any of the above tests indicate a malfunctioning TPS, replacement is necessary.
  2. Reinstall and Clear Codes: After replacing the TPS, clear any trouble codes using an OBD-II scanner.
Repair Instructions

Step 1: Remove the Faulty TPS

  1. Disconnect the Wiring Harness: Carefully release the locking tab and disconnect the TPS connector.
  2. Remove Mounting Bolts: Use a screwdriver to remove the screws or bolts securing the TPS to the throttle body.
  3. Remove the TPS: Gently pull the sensor away from the throttle body.

Step 2: Install New TPS

  1. Position New TPS: Align the new throttle position sensor with the mounting holes.
  2. Secure the TPS: Reinstall the screws/bolts and tighten them to the manufacturer's specifications (consult the service manual for torque specifications).
  3. Reconnect the Wiring Harness: Plug the connector back into the TPS until it clicks into place.

Step 3: Final Checks

  1. Reconnect the Battery: Reconnect the negative battery terminal.
  2. Start the Engine: Observe the engine’s performance and check for any warning lights.
  3. Test Drive: Take the vehicle for a test drive to ensure proper operation and that the CEL remains off.
Conclusion

If all tests are clear and the new TPS is functioning correctly, the issue should be resolved. If problems persist, further diagnostic steps may be necessary, including examining the engine control unit (ECU) or other components related to the throttle system.