How can I fix the key fob not working issue in my 2020 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes

1 hour

Time

medium

Difficulty

medium

Severity

4 min read

602 words

Problem Statement

Learn how to troubleshoot and fix the key fob not working issue in your 2020 Toyota Camry with step-by-step instructions.

Affected Component

key fob

Estimated Time

1 hour

Symptoms

•The key fob does not unlock or lock the doors.
•The engine does not start when the key fob is inside the vehicle.
•The key fob LED indicator does not light up when buttons are pressed.

Diagnostic Steps

1
Check Battery Life of the Key Fob
2
Inspect for Physical Damage
3
Check for Interference
4
Verify Vehicle’s Receiver Functionality

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small flat-head screwdriver or a plastic pry tool
•Replacement battery (CR2032, typically for most Toyota key fobs)
•Multimeter (optional for battery testing)
•Clean cloth (to avoid scratches)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Fixing Key Fob Not Working Issue in a 2020 Toyota Camry

Tools Required

Small flat-head screwdriver or a plastic pry tool
Replacement battery (CR2032, typically for most Toyota key fobs)
Multimeter (optional for battery testing)
Clean cloth (to avoid scratches)

Repair Instructions

Step 1: Replace the Battery

Open the Key Fob
- Use a small flat-head screwdriver or a plastic pry tool to gently pry open the key fob casing at the seam.
- Be careful not to damage the casing.
Remove the Old Battery
- Take note of the orientation of the battery (positive side facing up).
- Remove the old battery from the key fob.
Insert the New Battery
- Insert the new CR2032 battery in the same orientation as the old one.
- Ensure that the battery is seated properly in the compartment.
Reassemble the Key Fob
- Snap the key fob halves back together firmly until you hear a click.
- Ensure there are no gaps between the two halves.

Step 2: Reprogram the Key Fob (if necessary)

If the key fob still does not work after replacing the battery, it may need to be reprogrammed.

Get Inside the Vehicle
- Sit in the driver’s seat with all doors closed.
Insert the Key
- Insert the key into the ignition.
Turn the Ignition On/Off
- Turn the ignition to the "ON" position (do not start the engine) and back to "OFF" five times within 10 seconds. This should be done with the key in the ignition.
Listen for Lock/Unlock Sounds
- After the fifth turn, the vehicle should lock and unlock automatically, indicating that it is in programming mode.
Press the Key Fob Buttons
- Press any button on the key fob once to program it. The locks should cycle again to confirm programming.
- Repeat this for any additional key fobs.
Exit Programming Mode
- Turn the ignition to the "ON" position to exit programming mode.

Step 3: Test the Key Fob

Step outside the vehicle and test the key fob functions (lock, unlock, and start the engine).
If the key fob still does not work, consider visiting a Toyota dealership or an automotive locksmith for further diagnostics.

Conclusion

Following these steps should help resolve the key fob not working issue in your 2020 Toyota Camry. If the problem persists, there may be a deeper electrical issue or malfunction that requires professional attention.