FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix the problem of my 2021 Toyota Camry's windows not rolling up? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How can I fix the problem of my 2021 Toyota Camry's windows not rolling up?

How can I fix the problem of my 2021 Toyota Camry's windows not rolling up?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
624 words

Problem Statement

Learn how to diagnose and repair the issue of windows not rolling up on your 2021 Toyota Camry with step-by-step instructions and required tools.

Affected Component
power window system
Estimated Time
2-3 hours

Symptoms

  • •Windows do not respond to the control buttons.
  • •No audible motor sound when the buttons are pressed.
  • •Other windows may operate normally while one or more windows do not.
  • •Window lock button may prevent operation if engaged.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flathead screwdriver
  • •Phillips screwdriver
  • •Multimeter
  • •Trim removal tools
  • •Torque wrench (if applicable)
  • •Replacement parts (window motor, window switch, etc. based on diagnosis)

Additional Information

Affected Component
power window system
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Problem: Windows Not Rolling Up on 2021 Toyota Camry
Tools Required:
  • Flathead screwdriver
  • Phillips screwdriver
  • Multimeter
  • Trim removal tools
  • Torque wrench (if applicable)
  • Replacement parts (window motor, window switch, etc. based on diagnosis)
Repair Instructions:

Step 1: Access the Window Switch and Motor

  1. Remove the Door Panel:

    • Use a trim removal tool to gently pry off any clips securing the door panel.
    • Remove screws securing the door panel, typically located near the handle and at the bottom of the panel.
    • Carefully lift the panel upwards to detach it from the door frame.

  2. Disconnect Electrical Connectors:

    • Once the panel is off, locate the window switch connector and disconnect it.
    • If replacing the window motor, locate the motor connector as well.

Step 2: Test and Replace Components

  1. Testing the Window Switch:

    • Set the multimeter to the continuity setting.
    • Probe the terminals on the switch to verify if the switch sends power when pressed. If no continuity is found, replace the switch.

  2. Testing the Window Motor:

    • If the switch is functional, reconnect the window motor and apply direct power from a 12V battery to test the motor.
    • If the motor operates with direct power but not from the switch, the wiring may have an issue.

Step 3: Replace Faulty Components

  1. Replace the Window Switch:

    • If the switch is faulty, replace it by disconnecting the old one and connecting the new switch in the same orientation.

  2. Replace the Window Motor (if necessary):

    • If the window motor is faulty, remove the motor from the regulator by unscrewing any retaining screws.
    • Replace it with a new motor, ensuring it is securely fastened.

Step 4: Reassemble the Door Panel

  1. Reconnect Electrical Connectors:

    • Ensure all connectors are securely plugged back into their respective components.

  2. Reattach the Door Panel:

    • Align the door panel with the clips and press down firmly to secure it.
    • Reinstall any screws removed during disassembly.

  3. Test Window Operation:

    • Before fully securing the door panel, test the window operation to ensure it functions correctly.
    • Once confirmed, finish reassembling the door panel.
Conclusion

After completing these steps, the windows on your 2021 Toyota Camry should operate normally. If issues persist after replacing components, further investigation into wiring harness integrity or more complex electronic control systems may be necessary.