FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I fix the rearview camera malfunction in a 2021 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How can I fix the rearview camera malfunction in a 2021 Toyota Camry?

How can I fix the rearview camera malfunction in a 2021 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
679 words

Problem Statement

Learn how to diagnose and repair rearview camera issues in your 2021 Toyota Camry with step-by-step instructions.

Affected Component
rearview camera
Estimated Time
2-3 hours

Symptoms

  • •No Image Displayed
  • •Error Message
  • •Distorted Image
  • •Inconsistent Operation

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Multimeter
  • •Microfiber Cloth
  • •Cleaning Solution
  • •Screwdrivers (Phillips and Flathead)
  • •Trim Removal Tools
  • •Electrical Connector Cleaner (optional)

Additional Information

Affected Component
rearview camera
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Fixing Rearview Camera Malfunction in a 2021 Toyota Camry
Tools Required
  • OBD-II Scanner
  • Multimeter
  • Microfiber Cloth
  • Cleaning Solution
  • Screwdrivers (Phillips and Flathead)
  • Trim Removal Tools
  • Electrical Connector Cleaner (optional)

Repair Instructions

Step 1: Diagnostic Code Check
  • Connect the OBD-II scanner to the vehicle's diagnostic port.
  • Retrieve and note any trouble codes.
  • Clear the codes and check if they reappear upon attempting to use the rearview camera.
Step 2: Physical Inspection
  • Inspect the rearview camera located above the license plate.
  • Clean the camera lens with a microfiber cloth.
  • Look for cracks or damage to the camera housing.
Step 3: Checking Connections

  1. Remove the Rear Trim Panel:

    • Use trim removal tools to carefully pry off the rear trim panel where the camera is located.
    • Be cautious to avoid breaking any clips.

  2. Inspect the Wiring Harness:

    • Locate the wiring harness connected to the camera.
    • Ensure that the connector is seated securely.
    • Look for frayed wires or corrosion on the connectors.

  3. Clean Connectors:

    • If corrosion is present, use electrical connector cleaner to clean the terminals and reconnect them securely.
Step 4: Test Voltage Supply

  1. Set Up Multimeter:

    • Set the multimeter to the DC voltage setting.
    • Connect the black probe to a ground point and the red probe to the power wire of the camera.

  2. Check Voltage:

    • Have an assistant put the vehicle in reverse.
    • Confirm that the multimeter reads approximately 6-12 volts.
    • If there is no voltage, trace the wiring back to the multimedia unit for issues.
Step 5: Replace the Camera (if necessary)

  1. Remove the Old Camera:

    • Disconnect the wiring harness from the rearview camera.
    • Remove any screws or clips holding the camera in place.
    • Carefully pull the camera out from its mounting bracket.

  2. Install the New Camera:

    • Insert the new rearview camera into the mounting bracket.
    • Secure it with screws or clips as necessary.
    • Reconnect the wiring harness.

  3. Reassemble Trim Panel:

    • Reinstall the rear trim panel by snapping it back into place, ensuring all clips are secure.
Step 6: Final Testing
  • Start the vehicle and shift into reverse to test the rearview camera.
  • Ensure that the image is clear and functioning correctly.
  • If the issue persists, consider having a professional inspect the multimedia unit or wiring further.

Conclusion

Following these steps should help diagnose and fix the rearview camera malfunction in your 2021 Toyota Camry. If issues continue after these repairs, it may be necessary to consult with a professional technician or Toyota service center for further assistance.