FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How can I troubleshoot the transmission slipping issue in a 2019 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How can I troubleshoot the transmission slipping issue in a 2019 Toyota Camry?

How can I troubleshoot the transmission slipping issue in a 2019 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Error Code: P0700, P2716
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
624 words

Problem Statement

Learn how to troubleshoot and repair transmission slipping issues in a 2019 Toyota Camry with our detailed guide, including symptoms, diagnostic steps, and required tools.

Error Code
P0700, P2716
Affected Component
Transmission
Estimated Time
2-4 hours

Symptoms

  • •Engine RPM increases without corresponding speed increase
  • •Delayed engagement
  • •Unusual noises
  • •Check engine light illuminated

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Transmission Fluid Dipstick
  • •Ramps or Jack Stands
  • •10mm and 12mm Socket Set
  • •Transmission Fluid
  • •Clean Rags
  • •Torque Wrench

Additional Information

Error Code
P0700, P2716
Affected Component
Transmission
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Troubleshooting Transmission Slipping Issue in a 2019 Toyota Camry
Tools Required
  • OBD-II Scanner
  • Transmission Fluid Dipstick
  • Ramps or Jack Stands (for under-car inspection)
  • 10mm and 12mm Socket Set
  • Transmission Fluid (if low)
  • Clean Rags
  • Torque Wrench (if needed for fluid pan removal)
Repair Instructions

Step 1: Check and Top Off Transmission Fluid

  1. Locate the Transmission Dipstick: Usually found near the rear of the engine bay.
  2. Remove the Dipstick: Wipe clean and reinsert to check fluid level.
  3. Add Fluid If Necessary: If the fluid is low, add the appropriate type of transmission fluid (refer to the owner's manual for specifications) through the dipstick tube. Avoid overfilling.

Step 2: Inspect and Replace Transmission Fluid (if needed)

  1. Drain Fluid: Position a drain pan under the transmission pan. Remove the pan bolts with a socket and allow the fluid to drain completely.
  2. Inspect Filter: Remove the transmission filter and inspect it. Replace if it is clogged or damaged.
  3. Replace Fluid: Reinstall the filter and pan. Tighten bolts to manufacturer specifications. Fill with new transmission fluid through the dipstick tube.

Step 3: Check for Electrical Issues

  1. Inspect TCM and Wiring: Ensure that the wiring harness connected to the TCM is secure and free of corrosion.
  2. Reset TCM: Disconnect the battery for about 10 minutes to reset the TCM. Reconnect and check if the issue persists.

Step 4: Perform a Transmission Adaptation Reset (if applicable)

  1. Use OBD-II Scanner: Some scanners have the ability to perform a transmission adaptation reset. Follow the scanner's instructions to complete this process.
  2. Test Drive: After the reset, take the vehicle for a test drive to check if the slipping issue has been resolved.
Final Steps
  1. Re-scan for Codes: After repairs, use the OBD-II scanner again to check for any remaining or new trouble codes.
  2. Monitor Performance: Keep an eye on the vehicle's performance over the next few days for any signs of recurrence.
Conclusion

If the transmission slipping issue persists after all these troubleshooting steps, it may indicate a more serious internal problem with the transmission that requires professional diagnosis and repair. Possible issues may include worn clutches, faulty solenoids, or internal mechanical failures. Consider consulting a certified transmission specialist or your local Toyota dealer for further assistance.