FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I fix the rearview camera malfunction in my 2020 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How do I fix the rearview camera malfunction in my 2020 Toyota Camry?

How do I fix the rearview camera malfunction in my 2020 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
686 words

Problem Statement

Learn how to diagnose and fix rearview camera malfunctions in your 2020 Toyota Camry with detailed steps and required tools.

Affected Component
rearview camera
Estimated Time
1-2 hours

Symptoms

  • •Camera display is blank or shows static.
  • •Camera image is distorted or has poor quality.
  • •Error message on the infotainment system regarding the camera.
  • •Camera does not activate when shifting to reverse.
  • •Flickering or intermittent camera feed.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner (optional, for reading error codes)
  • •Multimeter
  • •Screwdriver set (Phillips and flathead)
  • •Trim removal tools
  • •Soft cloth for cleaning
  • •Replacement fuse (if necessary)

Additional Information

Affected Component
rearview camera
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Fixing Rearview Camera Malfunction in a 2020 Toyota Camry

The rearview camera system is an essential safety feature in modern vehicles. If your 2020 Toyota Camry is experiencing a rearview camera malfunction, follow these detailed steps to diagnose and potentially fix the issue.

Tools Required
  • OBD-II scanner (optional, for reading error codes)
  • Multimeter
  • Screwdriver set (Phillips and flathead)
  • Trim removal tools
  • Soft cloth for cleaning
  • Replacement fuse (if necessary)
Repair Instructions

Step 1: Inspect and Clean the Camera Lens

  1. Clean the Lens:
    • Use a soft cloth to gently clean the camera lens. Ensure there are no obstructions.
    • Test the camera again by shifting into reverse.

Step 2: Check and Replace the Fuse

  1. Locate the Fuse Box:
    • Refer to the owner's manual for the exact location of the rear camera fuse.
  2. Inspect the Fuse:
    • Remove the fuse using a fuse puller or pliers.
    • Check if the metal strip inside the fuse is broken.
  3. Replace the Fuse:
    • If blown, replace it with a fuse of the same amperage.
    • Reinstall the fuse and test the rearview camera.

Step 3: Inspect Wiring and Connections

  1. Access the Camera Wiring:
    • Remove the interior trim panel in the trunk to access the camera's wiring harness.
    • Use trim removal tools to avoid damaging clips.
  2. Examine the Wiring:
    • Look for any visible signs of damage to the wiring.
    • Ensure the connector is securely attached to the camera.
  3. Test Voltage:
    • Use a multimeter to check for voltage at the camera connector while the vehicle is in reverse (should be around 12V).
    • If no voltage is present, trace back to the source of the power.

Step 4: Reset the System (if applicable)

  1. Disconnect the Battery:
    • Disconnect the negative terminal of the battery and wait for about 15 minutes.
  2. Reconnect the Battery:
    • Reconnect the terminal and test the camera when shifting into reverse.

Step 5: Replace the Camera (if necessary)

  1. Remove the Old Camera:
    • If the camera is still malfunctioning after all checks, it may need replacement.
    • Carefully unscrew the camera from its mount.
    • Disconnect the wiring harness.
  2. Install the New Camera:
    • Connect the new camera's wiring harness.
    • Secure the new camera in place with screws.
  3. Test the New Camera:
    • Shift into reverse and check if the new camera functions correctly.
Conclusion

If your rearview camera is still malfunctioning after performing these steps, it may be time to consult a professional technician or visit a Toyota dealership for further diagnostic testing. They can access more advanced tools and software to identify any hidden issues within the vehicle’s electronic systems.