How do I reset the maintenance light on a 2021 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes

easy

Difficulty

low

Severity

3 min read

421 words

Problem Statement

Learn how to reset the maintenance light on your 2021 Toyota Camry with these easy steps. Ensure your vehicle is ready for optimal performance.

Affected Component

maintenance light

Symptoms

•Maintenance light is illuminated on the dashboard.
•Service reminder appears on the multi-information display (MID).

Diagnostic Steps

1
Verify Maintenance Status: Before resetting the maintenance light, ensure that the required maintenance (oil change, tire rotation, etc.) has been completed.
2
Check Dashboard: Turn the ignition to the 'ON' position (do not start the engine) and observe the dashboard. Confirm that the maintenance light is on and ready to be reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle key or key fob

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Resetting the Maintenance Light on a 2021 Toyota Camry

The maintenance light on your 2021 Toyota Camry serves to remind you when routine maintenance is due. After performing the required service, you will need to reset this light. Below are detailed steps to reset the maintenance light.

Tools Required

No special tools required, just the vehicle key or key fob.

Reset Instructions

Step 1: Turn the Ignition On

Insert the key or press the start button without pressing the brake pedal to turn the ignition to the "ON" position. The dashboard lights should illuminate, but the engine should not start.

Step 2: Access the Multi-Information Display

Use the arrow buttons on the steering wheel to navigate through the multi-information display on the dashboard.
Look for the “Settings” or “Maintenance” section.

Step 3: Select Maintenance

Navigate to the “Maintenance” option. This is usually found under the “Settings” menu. Use the right arrow button to select it.

Step 4: Reset Maintenance Light

Once you are in the Maintenance section, look for the “Oil Maintenance” or “Reset Maintenance” option.
Select this option, and you may see a prompt asking you to confirm the reset.
Confirm the reset by selecting the “Yes” option.

Step 5: Verify Reset

After confirming, exit the menu and turn the ignition off.
Turn the ignition back on (again without starting the engine) and check to see if the maintenance light is no longer illuminated.

Troubleshooting

If the Light Does Not Reset: If the maintenance light remains on after following the steps, ensure that you have navigated to the correct menu and selected the reset option properly. If issues persist, consult your owner’s manual for additional troubleshooting or consider contacting a Toyota dealership for further assistance.

Conclusion

Resetting the maintenance light on your 2021 Toyota Camry is a straightforward process that can be done in a few simple steps. Ensure that maintenance has been completed prior to resetting to keep your vehicle in optimal condition.