How do I reset the tire pressure monitoring system in my 2018 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes

30 minutes

Time

easy

Difficulty

low

Severity

3 min read

445 words

Problem Statement

Learn how to reset the Tire Pressure Monitoring System (TPMS) in your 2018 Toyota Camry with these easy steps and required tools.

Affected Component

Tire Pressure Monitoring System (TPMS)

Estimated Time

30 minutes

Symptoms

•TPMS warning light illuminated on the dashboard
•Inaccurate tire pressure readings
•A message on the dashboard indicating low tire pressure

Diagnostic Steps

1
Check Tire Pressures
2
Inflate Tires as Needed

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•Air compressor (if necessary)
•Owner's manual (for reference)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

Resetting the Tire Pressure Monitoring System (TPMS) in your 2018 Toyota Camry is a straightforward process. Below are the detailed steps, tools required, and diagnostic instructions to ensure you correctly reset the system.

Tools Required

Tire pressure gauge
Air compressor (if necessary)
Owner's manual (for reference)

Resetting the TPMS

Follow these steps to reset the TPMS:

Turn the Ignition On:
- Insert the key into the ignition or press the start button without starting the engine.
- Ensure the vehicle is in the 'ON' position without starting the engine.
Locate the TPMS Reset Button:
- The TPMS reset button is usually located under the steering wheel or around the driver's side dashboard. Consult your owner’s manual for the exact location.
Press and Hold the TPMS Reset Button:
- Press and hold the TPMS reset button until the TPMS indicator light blinks three times, then release the button.
Turn Off the Ignition:
- After releasing the button, turn the ignition off.
Start the Engine:
- Start the engine and allow it to run for a few minutes. The TPMS light should go off after a few minutes of driving.
Verify the Reset:
- Drive the vehicle for about 10-15 minutes at a speed of over 25 mph to ensure that the TPMS has recalibrated.
- Check to see if the TPMS warning light has turned off.

Additional Notes

If the TPMS light remains on after following these steps, there may be an issue with one of the tire pressure sensors or the TPMS system itself.
In such cases, it's advisable to have the system checked by a professional mechanic or at a Toyota dealership to diagnose and fix any underlying issues.

By following these detailed steps, you should be able to reset the TPMS on your 2018 Toyota Camry effectively. Always ensure that your tire pressures are regularly checked to keep the TPMS functioning correctly.