FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
How do I troubleshoot the tire pressure monitoring system in my 2018 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/How do I troubleshoot the tire pressure monitoring system in my 2018 Toyota Camry?

How do I troubleshoot the tire pressure monitoring system in my 2018 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Error Code: C2121, C2122
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
606 words

Problem Statement

Learn how to troubleshoot and repair the Tire Pressure Monitoring System (TPMS) in your 2018 Toyota Camry with step-by-step instructions.

Error Code
C2121, C2122
Affected Component
Tire Pressure Monitoring System (TPMS)
Estimated Time
1-2 hours

Symptoms

  • •TPMS Warning Light illuminated
  • •Inaccurate Tire Pressure Readings
  • •Flat Tire or Low Tire Pressure

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Tire pressure gauge
  • •OBD-II scanner
  • •Tire iron
  • •Valve core tool
  • •TPMS sensor tool
  • •Tire inflator or air compressor

Additional Information

Error Code
C2121, C2122
Affected Component
Tire Pressure Monitoring System (TPMS)
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Troubleshooting the Tire Pressure Monitoring System (TPMS) in a 2018 Toyota Camry

Tools Required
  • Tire pressure gauge
  • OBD-II scanner
  • Tire iron (for removing tires if necessary)
  • Valve core tool (for checking and replacing valve cores)
  • TPMS sensor tool (optional but useful for reading sensor data)
  • Tire inflator or air compressor
Repair Instructions
Step 1: Tire Pressure Adjustment
  1. Inflate or Deflate Tires: Adjust tire pressures to the manufacturer’s specifications using an air compressor or by releasing air from the tire.
  2. Reset TPMS Light: After adjusting, drive the vehicle for a short distance (typically 10-15 minutes) to allow the TPMS to recalibrate.
Step 2: TPMS Sensor Replacement (if necessary)

  1. Remove the Tire:

    • Use a tire iron to loosen the lug nuts.
    • Lift the vehicle using a jack and secure it with jack stands.
    • Remove the lug nuts and take off the tire.

  2. Replace TPMS Sensor:

    • Access the Sensor: Remove the valve stem nut and carefully detach the sensor from the valve.
    • Install New Sensor: Attach the new TPMS sensor to the valve stem, securing it with the nut.
    • Reinstall the Tire: Mount the tire back onto the vehicle and hand-tighten the lug nuts.

  3. Relearn TPMS Sensors:

    • Turn Ignition On: Without starting the engine, turn the ignition to the "On" position.
    • Press TPMS Reset Button: Locate the TPMS reset button (usually under the steering column) and hold it until the TPMS light blinks three times, then release it. The system will now relearn the sensor positions.
Step 3: Clear Diagnostic Codes
  1. Use OBD-II Scanner: After repairs, connect the OBD-II scanner and clear any TPMS-related codes.
  2. Test Drive: Take the vehicle for a test drive to ensure the TPMS warning light does not reappear.
Conclusion

Once these steps are completed, the TPMS in your 2018 Toyota Camry should function correctly. If the warning light continues to illuminate or you encounter further issues, it may be necessary to consult a professional technician for advanced diagnostics.