how to reset maintenance light on Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

393 words

Problem Statement

Learn how to reset the maintenance light on a Toyota Camry (2018-present) with this step-by-step guide. Quick and easy instructions for vehicle maintenance.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stable position before performing any maintenance reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Notification of upcoming maintenance displayed on the screen
•Engine oil change reminder activated
•Tire rotation reminder activated

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the key fob is not in the ignition.
2
Insert the key or press the start button without pressing the brake pedal to turn on the electrical systems (accessory mode).
3
Navigate to the vehicle settings on the dashboard display using the controls.
4
Locate the maintenance or service interval settings in the display menu.
5
Select the option to reset or clear the maintenance reminder.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is in the 'OFF' position and the key fob is not in the ignition.
2
Insert the key or press the start button without pressing the brake pedal to turn on the electrical systems (accessory mode).
3
Navigate to the vehicle settings on the dashboard display using the controls.
4
Locate the maintenance or service interval settings in the display menu.
5
Select the option to reset or clear the maintenance reminder.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked on a level surface with the engine off.

2. Turn on the Ignition

Insert the key into the ignition or have the key fob in the vehicle.
Press the start button once without pressing the brake pedal to enter accessory mode.

Use the steering wheel controls to navigate through the display settings.
Find the "Settings" or "Maintenance" option on the dashboard screen.

4. Reset the Maintenance Light

Select the "Maintenance" option from the menu.
Choose the “Reset” or “Clear” option for the maintenance light.
Confirm the reset when prompted on the screen.

5. Turn Off the Ignition

Turn the ignition off by pressing the start button again (if using push start) or turning the key to the OFF position.