how to reset the maintenance light in Toyota Camry Eighth Generation (2018-present)?

Toyota Camry Eighth Generation (2018-present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

369 words

Problem Statement

Learn how to reset the maintenance light in your Toyota Camry (2018-present) with this simple step-by-step guide. Ensure your vehicle is ready for the road.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a level surface before performing any resets.

Symptoms

•Maintenance light remains illuminated on the dashboard
•Notifications for service interval appear on the display
•Reminder messages for oil change or maintenance display intermittently

Diagnostic Steps

1
Ensure the vehicle is turned off and the key is removed from the ignition.
2
Insert the key into the ignition or press the start button without pressing the brake pedal to turn on the accessory mode.
3
Locate and press the trip meter reset button on the dashboard until the trip meter is displayed.
4
Turn the ignition switch to the 'ON' position (do not start the engine) while continuing to hold the trip reset button.
5
Release the trip reset button once the maintenance light starts to blink and then goes off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required

Parts Required

•None required

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Ensure the vehicle is turned off and the key is removed from the ignition.
2
Insert the key into the ignition or press the start button without pressing the brake pedal to turn on the accessory mode.
3
Locate and press the trip meter reset button on the dashboard until the trip meter is displayed.
4
Turn the ignition switch to the 'ON' position (do not start the engine) while continuing to hold the trip reset button.
5
Release the trip reset button once the maintenance light starts to blink and then goes off.

Solution

1. Preparation

Gather necessary tools: None required for this process.
Ensure the vehicle is parked in a safe location with the ignition off.

2. Resetting the Maintenance Light

Insert the key into the ignition or press the start button for accessory mode.
Press and hold the trip meter reset button until the trip meter is displayed.
Turn the ignition to the "ON" position (do not start the engine) while still holding the trip reset button.
Continue holding the button until the maintenance light blinks and then turns off.
Release the trip reset button and turn off the ignition.