how to reset the maintenance light on my Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

377 words

Problem Statement

Learn how to reset the maintenance light on your Toyota Camry (2018-present) with this quick step-by-step guide. No tools required.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park and on a flat surface during the reset process.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder message displayed on the multi-information display
•No other driving or performance issues present

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Press the odometer button until the trip meter displays 'Trip A'.
3
Turn the ignition off.
4
While holding the odometer button, turn the ignition back to the 'ON' position.
5
Continue holding the odometer button until the maintenance light turns off, which may take about 10 seconds.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition key to the 'ON' position without starting the engine.
2
Press the odometer button until the trip meter displays 'Trip A'.
3
Turn the ignition off.
4
While holding the odometer button, turn the ignition back to the 'ON' position.
5
Continue holding the odometer button until the maintenance light turns off, which may take about 10 seconds.

Solution

1. Preparation

Gather necessary tools: None required for this procedure.
Ensure the vehicle is parked on a level surface and the ignition is off.

2. Accessing the Odometer

Turn the ignition key to the "ON" position without starting the engine. This powers the electrical system.
Locate the odometer button on the instrument cluster.

3. Setting the Trip Meter

Press and hold the odometer button until the display shows "Trip A". This indicates that you are in the correct mode to reset the maintenance light.

4. Turning Off the Ignition

Turn the ignition key to the "OFF" position while still holding the odometer button.

5. Resetting the Maintenance Light

While continuing to hold the odometer button, turn the ignition back to the "ON" position without starting the engine.
Keep holding the odometer button until the maintenance light resets and turns off, which should occur within 10 seconds.