FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Camry Eighth Generation (2018-present) - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/how to reset the maintenance light on Toyota Camry Eighth Generation (2018-present)

how to reset the maintenance light on Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
307 words

Problem Statement

Learn how to reset the maintenance light on a Toyota Camry (2018-present) with this quick guide. Step-by-step instructions for a successful reset.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a safe, stationary position before performing the reset.

Symptoms

  • •Maintenance light remains illuminated on the dashboard
  • •No other engine warning lights are present
  • •Vehicle has been serviced according to the maintenance schedule

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools: None required for this procedure.
  • Ensure the vehicle is parked on a flat surface and is in "ON" position.
2. Resetting the Maintenance Light
  1. Turn the ignition to the "ON" position: Do not start the engine, just turn the key or press the start button to the "ON" position.
  2. Press the gas pedal: Fully depress the gas pedal three times within five seconds.
  3. Observe the maintenance light: After performing the gas pedal action, the maintenance light should turn off.
  4. Turn off the ignition: Turn the key back to the "OFF" position or press the start button again.
  5. Verify reset: Turn the ignition back to "ON" position and check that the maintenance light is no longer illuminated.