FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Toyota Camry Eighth Generation (2018-present) - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/how to reset the maintenance light on Toyota Camry Eighth Generation (2018-present)

how to reset the maintenance light on Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

Error Codes
less than 10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
374 words

Problem Statement

Learn how to reset the maintenance light on a 2018-present Toyota Camry. Step-by-step guide for a quick and easy reset process.

Affected Component
Electrical
Estimated Time
less than 10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in a stationary position before performing the reset.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Vehicle may display a message indicating maintenance is due
  • •No changes in vehicle performance or functionality

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Vehicle key

Parts Required

  • •None

Additional Information

Affected Component
Electrical
Estimated Time
less than 10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked safely with the engine off.
  • Gather necessary items: the vehicle's key and a clean workspace.
2. Reset Maintenance Light

  1. Access the Trip Meter Reset Button

    • Locate the trip meter reset button on the instrument panel, usually found near the odometer display.

  2. Turn the Ignition ON

    • Insert the key into the ignition and turn it to the "ON" position without starting the engine.

  3. Hold the Trip Meter Reset Button

    • Press and hold the trip meter reset button until the display shows the current trip meter reading.

  4. Watch for the Maintenance Light

    • Continue holding the button until the maintenance light blinks and then goes off, usually after about 10 seconds.

  5. Turn the Ignition OFF

    • Turn the ignition back to the "OFF" position.

  6. Start the Vehicle

    • Start the engine to verify that the maintenance light is no longer illuminated.