how to reset the maintenance reminder on my Toyota Camry Eighth Generation (2018-present)

Toyota Camry Eighth Generation (2018-present)

Error Codes

5 minutes

Time

easy

Difficulty

low

Severity

2 min read

308 words

Problem Statement

Learn how to reset the maintenance reminder on your Toyota Camry (2018-2023) with this quick step-by-step guide. Ensure your vehicle stays on schedule.

Affected Component

Electrical

Estimated Time

5 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in a safe and stationary position before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder message displayed on the multi-information display
•No other performance issues or symptoms present

Diagnostic Steps

1
Ensure the vehicle is in the 'ON' or 'RUN' position without starting the engine.
2
Locate the odometer display on the dashboard.
3
Check that the odometer is showing the total mileage, not the trip mileage.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required for resetting

Parts Required

•None required for resetting

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Keep the keys handy to access the ignition.

2. Access Maintenance Reset Mode

Turn the ignition to the "ON" position without starting the engine.
Press the "Odometer" button until the odometer reading is displayed.
Turn off the ignition.

3. Reset the Maintenance Reminder

While holding the "Odometer" button, turn the ignition back to the "ON" position.
Continue holding the "Odometer" button until the maintenance light begins to blink and then turns off.
Release the "Odometer" button.

4. Verification of Reset

Turn off the ignition and then turn it back to the "ON" position again to verify that the maintenance light is no longer illuminated.