FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the common issues with the keyless entry system in the 2020 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What are the common issues with the keyless entry system in the 2020 Toyota Camry?

What are the common issues with the keyless entry system in the 2020 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
1-2 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
635 words

Problem Statement

Learn about common issues with the keyless entry system in the 2020 Toyota Camry, including symptoms, diagnostic steps, and repair instructions.

Affected Component
Keyless Entry System
Estimated Time
1-2 hours

Symptoms

  • •Door Locks Not Responding
  • •Intermittent Functionality
  • •Key Fob Not Detected
  • •No Response from Push Button Start
  • •Alarm Triggering Unexpectedly

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Multimeter
  • •Screwdrivers (Phillips and Flathead)
  • •Pliers
  • •Replacement Key Fob Battery (CR2032 or CR2025)
  • •Torque Wrench

Additional Information

Affected Component
Keyless Entry System
Estimated Time
1-2 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Common Issues with the Keyless Entry System in the 2020 Toyota Camry

The keyless entry system in the 2020 Toyota Camry can experience several common issues. Below are the symptoms, diagnostic steps, tools required, and repair instructions for these issues.

Common Symptoms of Keyless Entry Issues
  1. Door Locks Not Responding: The doors do not lock or unlock when the key fob button is pressed.
  2. Intermittent Functionality: The key fob works sometimes but not consistently.
  3. Key Fob Not Detected: The vehicle does not recognize the key fob when inside the car.
  4. No Response from Push Button Start: The engine does not start when the brake pedal is pressed with the key fob inside the vehicle.
  5. Alarm Triggering Unexpectedly: The car alarm goes off without any apparent cause.
Step 1: Visual Inspection
  • Check Key Fob Battery: Open the key fob and inspect the battery. If it's weak or dead, replace it (usually a CR2032 or CR2025 battery).
  • Inspect Key Fob Condition: Look for physical damage, corrosion, or water ingress.
Step 2: Test Key Fob Functionality
  • Key Fob Test: Use a multimeter to test the battery voltage (should be around 3 volts). If it's low, replace the battery.
  • Reprogram Key Fob: If the battery is fine, try reprogramming the key fob (see repair instructions below).
Step 3: Check Receiver Module
  • Locate the Smart Key ECU: Usually located under the dashboard or near the driver's side.
  • Scan for DTCs: Use an OBD-II scanner to check for diagnostic trouble codes related to the keyless entry system.
Step 4: Inspect Wiring and Connections
  • Visual Inspection: Check wiring harnesses for damage or disconnection between the keyless entry system and the body control module.
  • Test Continuity: Use a multimeter to check for continuity in the wiring.
Tools Required
  • OBD-II Scanner
  • Multimeter
  • Screwdrivers (Phillips and Flathead)
  • Pliers
  • Replacement Key Fob Battery (CR2032 or CR2025)
  • Torque Wrench (if necessary for reassembly)
Repair Instructions
Repair 1: Replace Key Fob Battery
  1. Open Key Fob: Use a flathead screwdriver to carefully pry open the key fob casing.
  2. Remove Old Battery: Take out the old battery and replace it with a new one, ensuring correct polarity.
  3. Reassemble Key Fob: Snap the fob back together and test its functionality.
Repair 2: Reprogram Key Fob
  1. Sit Inside the Vehicle: Ensure all doors are closed and the key fob is inside.
  2. Insert Key: Insert the key into the ignition and turn it to 'ON' without starting the engine.
  3. Press Lock Button: On the key fob, press the 'LOCK' button for a few seconds.
  4. Turn Key Off: Turn the key back to 'OFF' and remove it.
  5. Test Fob: Ensure the key fob now works to unlock and lock doors.
Repair 3: Repair Wiring/Connections
  1. Access the Smart Key ECU: Remove the dashboard cover as needed to access the Smart Key ECU.
  2. Check Connections: Ensure all connectors are firmly seated. Repair or replace any damaged connectors or wires.
  3. Reassemble Dashboard: Carefully put all components back together and test the system.
Repair 4: Replace Smart Key ECU (if necessary)
  1. Remove the Old ECU: Disconnect the battery, then remove the screws holding the Smart Key ECU in place.
  2. Install New ECU: Connect the new ECU and secure it with screws.
  3. Reconnect the Battery: Reconnect the negative battery terminal and test the keyless entry system.
Conclusion

If the above steps do not resolve the issue, it may be advisable to consult with a professional automotive technician or visit a Toyota dealership for further diagnostics, as there may be more complex issues at play with the vehicle's electronic control systems.