FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the common transmission issues in the 2018 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What are the common transmission issues in the 2018 Toyota Camry?

What are the common transmission issues in the 2018 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
717 words

Problem Statement

Explore common transmission issues in the 2018 Toyota Camry, including symptoms, diagnostic steps, and repair instructions.

Affected Component
transmission

Symptoms

  • •Delayed Engagement
  • •Slipping Transmission
  • •Unusual Noises
  • •Fluid Leaks
  • •Warning Lights

Diagnostic Steps

  1. 1
  2. 2
  3. 3

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Transmission fluid dipstick
  • •Funnel
  • •Clean rag
  • •OBD-II scanner
  • •Floor jack and jack stands
  • •Flashlight
  • •Transmission fluid pump
  • •New transmission fluid
  • •Drain pan
  • •Transmission rebuild kit
  • •Hand tools
  • •Torque wrench
  • •Replacement gaskets or seals
  • •Multimeter

Additional Information

Affected Component
transmission
Difficulty
medium
Severity
medium
Tools Required
14 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Common Transmission Issues in the 2018 Toyota Camry (XV70)

The 2018 Toyota Camry has been generally well-received, but like any vehicle, it may experience transmission-related issues. Below are some common symptoms, diagnostic steps, tools required, and repair instructions for addressing these transmission issues.

Common Symptoms of Transmission Issues
  1. Delayed Engagement

    • Symptoms: The vehicle hesitates before engaging into gear when shifting from Park to Drive or Reverse.
  2. Slipping Transmission

    • Symptoms: The engine revs without a corresponding increase in speed. You may feel the vehicle lose power unexpectedly.
  3. Unusual Noises

    • Symptoms: Grinding, whining, or clunking noises when shifting gears.
  4. Fluid Leaks

    • Symptoms: Puddles of reddish-brown fluid underneath the vehicle.
  5. Warning Lights

    • Symptoms: The check engine light or transmission warning indicator illuminates on the dashboard.
Step 1: Check Transmission Fluid Level and Condition
  • Tools Required:

    • Transmission fluid dipstick (if equipped)
    • Funnel
    • Clean rag
  • Procedure:

    1. Start the engine and let it warm up to operating temperature.
    2. With the engine running, shift through all gears, pausing in each for a few seconds, and return to Park.
    3. Remove the dipstick and wipe it clean.
    4. Reinsert the dipstick and remove it again to check the fluid level.
    5. Inspect the fluid condition. It should be bright red and clear, with no burnt odor. If it is dark or has a burnt smell, it may need to be changed.
Step 2: Scan for Diagnostic Trouble Codes (DTCs)
  • Tools Required:

    • OBD-II scanner
  • Procedure:

    1. Connect the OBD-II scanner to the vehicle's diagnostic port (usually under the dashboard near the driver's seat).
    2. Turn on the ignition (do not start the engine) and read any stored codes.
    3. Note the codes and look them up for specific transmission issues.
Step 3: Inspect for Leaks
  • Tools Required:

    • Floor jack and jack stands (for lifting the vehicle)
    • Flashlight
  • Procedure:

    1. Lift the vehicle securely using a floor jack and jack stands.
    2. Inspect the undercarriage for any reddish fluid leaks, particularly around the transmission pan and cooler lines.
    3. Identify the source of any leaks.
Repair Instructions
Repairing Low or Dirty Transmission Fluid
  1. If the fluid is low or dirty, drain and replace it:
    • Tools Required: Transmission fluid pump, new transmission fluid (consult the owner's manual for specifications), drain pan.

    • Procedure:

      1. Drain the old fluid by removing the drain plug (if equipped) or the transmission pan.
      2. Replace the filter (if applicable) by removing the transmission pan and installing a new filter.
      3. Reinstall the pan and torque the bolts to manufacturer specifications.
      4. Fill the transmission with new fluid using the funnel through the dipstick tube, checking the level as you go.
Fixing Transmission Slipping
  1. If the issue is slipping due to low fluid or a worn clutch, you may need to perform a fluid change first. If it persists:
    • Tools Required: Transmission rebuild kit (if applicable), hand tools, torque wrench.

    • Procedure:

      1. If the fluid change does not resolve the issue, a more thorough diagnosis may be needed.
      2. Disassemble the transmission (this usually requires removing it from the vehicle).
      3. Inspect clutches and bands for wear. Replace as necessary.
      4. Reassemble and reinstall the transmission.
Addressing Fluid Leaks
  1. If you find a leak:
    • Tools Required: Replacement gaskets or seals, hand tools.

    • Procedure:

      1. Identify the source of the leak (e.g., pan gasket, cooler lines).
      2. Remove the affected component.
      3. Clean the mating surfaces and replace gaskets or seals.
      4. Reinstall the component and recheck for leaks post-operation.
Handling Warning Lights
  1. If warning lights persist:
    • Tools Required: OBD-II scanner, possibly a multimeter.

    • Procedure:

      1. Investigate the specific DTC codes retrieved earlier.
      2. Follow manufacturer guidelines to troubleshoot and repair the underlying issues causing the codes.
      3. Clear the codes and test drive the vehicle to see if the issue reoccurs.
Conclusion

If you are not comfortable performing these diagnostics and repairs, it is highly recommended to seek assistance from a professional automotive technician. Proper diagnosis and repair are crucial for the longevity and reliability of the transmission system in your 2018 Toyota Camry.