FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What are the symptoms of a failing crankshaft position sensor in a 2020 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What are the symptoms of a failing crankshaft position sensor in a 2020 Toyota Camry?

What are the symptoms of a failing crankshaft position sensor in a 2020 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
782 words

Problem Statement

Learn about the symptoms of a failing crankshaft position sensor in a 2020 Toyota Camry and follow diagnostic steps to confirm and replace the sensor.

Affected Component
crankshaft position sensor
Estimated Time
2-3 hours

Symptoms

  • •Check Engine Light (CEL)
  • •Engine Misfires or Rough Idle
  • •Difficulty Starting the Engine
  • •Stalling or Loss of Power
  • •Decreased Fuel Efficiency
  • •Erratic Engine Performance

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Flashlight
  • •OBD-II scanner
  • •Multimeter
  • •Oscilloscope (optional)
  • •Socket set (8mm and 10mm sockets)
  • •Torque wrench
  • •Ratchet
  • •Screwdriver set

Additional Information

Affected Component
crankshaft position sensor
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
8 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
1. Check Engine Light (CEL)
  • Symptom: The Check Engine Light may illuminate on the dashboard.
  • Reason: The engine control unit (ECU) detects abnormal signals or no signals from the CKP sensor.
2. Engine Misfires or Rough Idle
  • Symptom: The engine may misfire, stumble, or have a rough idle.
  • Reason: Inconsistent readings from the CKP sensor lead to improper ignition timing.
3. Difficulty Starting the Engine
  • Symptom: The engine may crank but fail to start, or it may take multiple attempts to start.
  • Reason: The ECU lacks proper timing information to ignite the fuel-air mixture.
4. Stalling or Loss of Power
  • Symptom: The engine may stall unexpectedly, particularly when idling or under load.
  • Reason: A failing sensor can cause the ECU to lose track of crankshaft position, leading to power loss.
5. Decreased Fuel Efficiency
  • Symptom: Noticeable drop in fuel efficiency or increased fuel consumption.
  • Reason: Improper timing can lead to inefficient combustion.
6. Erratic Engine Performance
  • Symptom: The engine may exhibit erratic acceleration or unresponsive throttle.
  • Reason: Inaccurate readings can affect the fuel injection timing and throttle response.
Step 1: Visual Inspection
  • Tools Required: Flashlight
  • Instructions: Inspect the wiring and connector of the CKP sensor for damage, corrosion, or loose connections.
Step 2: Scan for DTCs
  • Tools Required: OBD-II scanner
  • Instructions:
    1. Connect the OBD-II scanner to the vehicle's diagnostic port.
    2. Retrieve diagnostic trouble codes (DTCs) related to the CKP sensor (e.g., P0335, P0336).
    3. Note any other related codes that may point to other issues.
Step 3: Check Sensor Signal
  • Tools Required: Multimeter, oscilloscope (optional)
  • Instructions:
    1. Disconnect the CKP sensor connector.
    2. Set the multimeter to the appropriate voltage setting.
    3. Crank the engine while measuring the voltage output of the CKP sensor. It should produce a voltage signal.
    4. If using an oscilloscope, connect it to the sensor wire to view the waveform, which should resemble a square wave.
Step 4: Verify Sensor Resistance
  • Tools Required: Multimeter
  • Instructions:
    1. Disconnect the CKP sensor.
    2. Measure the resistance across the sensor terminals (check specifications for the correct resistance range).
    3. Compare the readings to the manufacturer’s specifications.
Step 5: Check for Ground
  • Tools Required: Multimeter
  • Instructions:
    1. Check the ground connection for the CKP sensor to ensure it is receiving proper ground.
Repair Instructions

If the CKP sensor is confirmed to be faulty, follow these instructions for replacement:

Tools Required:
  • Socket set (8mm and 10mm sockets)
  • Torque wrench
  • Ratchet
  • Screwdriver set
  • Replacement crankshaft position sensor
Step 1: Prepare the Vehicle
  • Park the vehicle on a flat surface and engage the parking brake.
  • Disconnect the negative battery terminal to prevent electrical shorts.
Step 2: Locate the CKP Sensor
  • The crankshaft position sensor is typically located near the crankshaft pulley or flywheel housing. Refer to the vehicle service manual for exact location.
Step 3: Remove the Old Sensor
  • If necessary, remove any engine covers to access the sensor.
  • Disconnect the electrical connector from the CKP sensor.
  • Remove the mounting bolts using the appropriate socket.
  • Carefully pull the sensor out from its housing.
Step 4: Install the New CKP Sensor
  • Apply a light coat of engine oil to the O-ring of the new sensor (if applicable).
  • Position the new sensor into its housing.
  • Secure the sensor with the mounting bolts and tighten to the manufacturer’s specified torque.
  • Reconnect the electrical connector.
Step 5: Reconnect the Battery
  • Reattach the negative battery terminal.
Step 6: Test the Repair
  • Start the engine and monitor for any warning lights or abnormal behavior.
  • Use the OBD-II scanner to clear any stored DTCs and confirm that no new codes appear during operation.
Step 7: Final Inspection
  • Check for leaks or loose connections and ensure everything is secure before closing the hood.

By following these steps, you should be able to diagnose and replace the crankshaft position sensor effectively on a 2020 Toyota Camry. If symptoms persist after replacement, further investigation into other engine management components may be necessary.