FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What could be causing the seatbelt warning light to stay on in my 2022 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What could be causing the seatbelt warning light to stay on in my 2022 Toyota Camry?

What could be causing the seatbelt warning light to stay on in my 2022 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-3 hours
Time
medium
Difficulty
medium
Severity
Error Code: B1327, B1328
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
573 words

Problem Statement

Learn how to diagnose and fix the seatbelt warning light issue in your 2022 Toyota Camry with our step-by-step guide.

Error Code
B1327, B1328
Affected Component
Seatbelt system
Estimated Time
2-3 hours

Symptoms

  • •Seatbelt warning light remains illuminated on the dashboard despite wearing a seatbelt.
  • •Chimes or alerts when the car is started.
  • •Warning light activation when the vehicle is in motion.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II Scanner
  • •Multimeter
  • •Screwdrivers (Phillips and flathead)
  • •Torx Bit Set
  • •Wire Brush
  • •Safety Goggles and Gloves

Additional Information

Error Code
B1327, B1328
Affected Component
Seatbelt system
Estimated Time
2-3 hours
Difficulty
medium
Severity
medium
Tools Required
6 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Diagnosing the Seatbelt Warning Light in a 2022 Toyota Camry

The seatbelt warning light in your 2022 Toyota Camry is designed to alert you when the seatbelts are not fastened, or there is a malfunction in the seatbelt system. If the warning light stays on even when the seatbelts are fastened, it may indicate one of several issues. Below are the symptoms, diagnostic steps, tools required, and repair instructions.

Tools Required
  • OBD-II Scanner
  • Multimeter (for electrical testing)
  • Screwdrivers (Phillips and flathead)
  • Torx Bit Set (if applicable)
  • Wire Brush (for cleaning contacts)
  • Safety Goggles and Gloves

Repair Instructions

  1. Clearing Fault Codes

    • If fault codes were read, clear them using the OBD-II scanner and observe if the warning light returns after a drive cycle.

  2. Inspect and Replace Seatbelt Latch

    • If the warning light persists, remove the seatbelt buckle assembly:
      • Disconnect the negative battery terminal.
      • Remove the screws securing the seatbelt buckle to the floor (typically requires a Torx bit).
      • Disconnect the electrical connector from the seatbelt latch.
      • Inspect the latch for damage or corrosion, clean contacts if necessary.
      • Replace the seatbelt buckle assembly if damaged.

  3. Testing the Seatbelt Switch

    • Using a multimeter, test the resistance of the seatbelt switch:
      • Disconnect the seatbelt connector.
      • Set the multimeter to measure resistance (ohms).
      • Measure across the terminals of the seatbelt switch while engaging and disengaging the belt. You should see continuity when engaged and no continuity when disengaged.
    • If the switch does not function correctly, replace it.

  4. Reassemble and Test

    • Reconnect all electrical connectors and secure the seatbelt buckle assembly.
    • Reconnect the battery terminal.
    • Start the vehicle and check if the seatbelt warning light has turned off.

  5. Final Verification

    • Drive the vehicle for a short distance to ensure the system resets properly.

Conclusion

If the seatbelt warning light remains on after performing these diagnostic and repair steps, further investigation may be required, potentially involving the vehicle’s body control module (BCM) or wiring issues. In such cases, consulting the service manual or a professional technician may be necessary for advanced troubleshooting.