FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What should I check if my 2020 Toyota Camry is making a popping noise? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What should I check if my 2020 Toyota Camry is making a popping noise?

What should I check if my 2020 Toyota Camry is making a popping noise?

Toyota Camry Eighth Generation (2018-present)

Error Codes
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
525 words

Problem Statement

Learn how to diagnose and fix a popping noise in your 2020 Toyota Camry with these detailed steps and required tools.

Affected Component
suspension, exhaust system, engine and transmission mounts

Symptoms

  • •A popping noise when driving
  • •Noise may be more pronounced during turns, acceleration, or going over bumps
  • •Possible vibrations or changes in handling characteristics
  • •No warning lights on the dashboard

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Floor jack and jack stands
  • •Lug wrench
  • •Flashlight
  • •Inspection mirror (optional)
  • •Torque wrench
  • •Socket set (metric)
  • •Mechanic’s stethoscope (optional)

Additional Information

Affected Component
suspension, exhaust system, engine and transmission mounts
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnosing a Popping Noise in a 2020 Toyota Camry

Step 1: Identify the Conditions of the Noise
  1. Location: Determine where the noise is coming from (front, rear, left, right).
  2. Speed: Note if the noise occurs at low speeds, high speeds, or both.
  3. Driving Conditions: Check if the noise occurs while turning, accelerating, braking, or going over uneven surfaces.
Step 2: Visual Inspection
  1. Park the Vehicle: Ensure the car is parked on a flat surface and the engine is off.
  2. Inspect the Wheel Wells: Look for any debris, loose components, or obvious signs of wear in the suspension and steering components.
  3. Check the Tires: Look for uneven wear, bulges, or any foreign objects lodged in the tread.
  4. Inspect the Underbody: Look for any loose heat shields, exhaust components, or underbody plastics that may be rattling.
Tools Required
  • Floor jack and jack stands
  • Lug wrench
  • Flashlight
  • Inspection mirror (optional)
  • Torque wrench
  • Socket set (metric)
  • Mechanic’s stethoscope (optional)
Repair Instructions
Step 3: Raise the Vehicle
  1. Use the Floor Jack: Lift the front or rear of the vehicle based on the noise location.
  2. Secure with Jack Stands: Place jack stands under the vehicle for safety.
Step 4: Check Suspension Components

  1. Inspect Control Arms and Ball Joints:

    • Look for any signs of damage, excessive play, or wear.
    • Use a pry bar to gently move the components and check for play.

  2. Examine Tie Rod Ends:

    • Check for play or looseness.
    • Inspect the rubber boots for tears or damage.

  3. Inspect Struts and Shocks:

    • Look for leaks or damage.
    • Check for any signs of top mount issues or loose bolts.
Step 5: Check Exhaust System
  1. Inspect for Loose Components:
    • Look for loose brackets, hangers, or clamps.
    • Tap on the exhaust system gently with a rubber mallet to see if the noise replicates.
Step 6: Check Engine and Transmission Mounts
  1. Inspect Mounts for Wear:
    • Look for cracked, broken, or worn engine and transmission mounts.
    • Check if the engine or transmission is shifting excessively during acceleration.
Step 7: Test Drive
  1. Reassemble and Lower the Vehicle: If anything was removed or adjusted, ensure it is reassembled correctly.
  2. Perform a Test Drive: Drive the vehicle under conditions where the noise was previously noted to assess if it persists.
Step 8: Record Findings
  1. Document Any Issues: If a component is found to be defective or worn, take note of it.
  2. Plan for Replacement: Order parts as necessary and schedule repairs.
Conclusion

If the popping noise persists despite thorough inspection, it may be advisable to consult with a professional technician or dealership for a more in-depth diagnosis. Complicated issues such as internal transmission problems or engine issues may require specialized equipment and expertise.