FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
What should I do if the cruise control is not working in a 2019 Toyota Camry? - Toyota Camry
Home/Cars/Toyota/Camry/Eighth Generation (2018-present)/What should I do if the cruise control is not working in a 2019 Toyota Camry?

What should I do if the cruise control is not working in a 2019 Toyota Camry?

Toyota Camry Eighth Generation (2018-present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
4 min read
708 words

Problem Statement

Learn how to diagnose and repair cruise control problems in a 2019 Toyota Camry with our step-by-step guide.

Affected Component
Cruise Control System
Estimated Time
2-4 hours

Symptoms

  • •Cruise control system does not engage when activated.
  • •Dashboard cruise control indicator light does not illuminate.
  • •Cruise control disengages unexpectedly while driving.
  • •No response from the cruise control buttons on the steering wheel.

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Screwdrivers (Phillips and flathead)
  • •Socket set
  • •Automotive fuse puller
  • •Replacement fuses (if necessary)
  • •Replacement brake pedal switch or throttle position sensor (if faulty)

Additional Information

Affected Component
Cruise Control System
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
7 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation

Troubleshooting Non-Functional Cruise Control in a 2019 Toyota Camry

Tools Required
  • OBD-II scanner
  • Multimeter
  • Screwdrivers (Phillips and flathead)
  • Socket set
  • Automotive fuse puller
  • Replacement fuses (if necessary)
  • Replacement brake pedal switch or throttle position sensor (if faulty)
Repair Instructions
Step 1: Visual Inspection
  1. Park the vehicle on a flat surface and turn off the ignition.
  2. Inspect the cruise control switch on the steering wheel for damage.
  3. Check the brake lights; ensure they are functioning properly.
Step 2: Check Fuses
  1. Open the fuse box and locate the cruise control fuse.
  2. Remove the fuse using a fuse puller.
  3. Inspect it visually; use a multimeter to check for continuity.
  4. Replace the fuse if it is blown.
Step 3: Scan for Error Codes
  1. Plug the OBD-II scanner into the vehicle’s OBD-II port.
  2. Turn on the ignition without starting the engine.
  3. Follow the scanner’s prompts to retrieve DTCs.
  4. Document any codes and refer to repair manuals for troubleshooting steps.
Step 4: Test the Brake Pedal Switch
  1. Locate the brake pedal switch, usually mounted on the brake pedal assembly.
  2. Disconnect the electrical connector.
  3. Using a multimeter, check for continuity when the brake pedal is not pressed.
  4. Replace the switch if it does not show continuity when the pedal is released.
Step 5: Inspect the Throttle Position Sensor
  1. Locate the TPS on the throttle body.
  2. Disconnect the electrical connector.
  3. Measure the voltage output with the throttle at various positions using a multimeter.
  4. If the readings are out of specification, replace the TPS.
Step 6: Check the Vehicle Speed Sensor
  1. Locate the VSS, typically mounted on the transmission.
  2. Disconnect the connector and measure the output voltage with the multimeter.
  3. Compare readings to manufacturer specifications; replace if faulty.
Final Steps
  1. After completing any repairs, reassemble any components removed during the diagnostic process.
  2. Clear any stored DTCs using the OBD-II scanner.
  3. Take the vehicle for a test drive to ensure the cruise control system functions correctly.
  4. If issues persist, further diagnosis may be required, potentially involving the ECU or wiring harness.

By following these steps, you should be able to diagnose and repair the cruise control issue in a 2019 Toyota Camry effectively. Always refer to the vehicle's service manual for specific details and specifications.