why does my Toyota Camry Eighth Generation (2018-present) feel like it’s bouncing on rough roads

Toyota Camry Eighth Generation (2018-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

497 words

Problem Statement

Learn how to diagnose and fix suspension bouncing issues in Toyota Camry (2018-present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical components.
•Ensure the vehicle is securely supported on jack stands before working underneath.

Symptoms

•Bouncing or excessive oscillation after hitting bumps
•Poor handling or stability during turns
•Noise from the suspension when driving over uneven surfaces
•Uneven tire wear
•Increased body roll during cornering

Diagnostic Steps

1
Inspect the vehicle's suspension components, including struts, shocks, and springs for visible damage or wear.
2
Check for leaks in the shock absorbers or struts.
3
Examine tire pressure and tread depth to ensure they are within specifications.
4
Perform a bounce test by pushing down on each corner of the vehicle to assess the shock absorber's damping ability.
5
Inspect the alignment settings using a wheel alignment machine.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Socket set
•Torque wrench
•Wheel chocks

Parts Required

•Replacement shock absorbers or struts (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the vehicle's suspension components, including struts, shocks, and springs for visible damage or wear.
2
Check for leaks in the shock absorbers or struts.
3
Examine tire pressure and tread depth to ensure they are within specifications.
4
Perform a bounce test by pushing down on each corner of the vehicle to assess the shock absorber's damping ability.
5
Inspect the alignment settings using a wheel alignment machine.

Solution

1. Preparation

Tools Required: Jack, jack stands, socket set, torque wrench, wheel chocks
Ensure the vehicle is parked on a level surface and the engine is off.
Wear safety goggles and gloves.

2. Lift the Vehicle

Use a jack to lift the vehicle from the designated lift points.
Secure the vehicle with jack stands to prevent accidental lowering.

3. Remove the Wheels

Use a socket set to remove the lug nuts and take off the wheels for access to the suspension.

4. Inspect and Replace Suspension Components

A. Inspect Shock Absorbers/Struts

Check for any signs of oil leakage or physical damage.
If damaged, remove the old strut by unbolting it from the top mount and lower control arm.

B. Replace Shock Absorbers/Struts

Install new shock absorbers or struts by reversing the removal procedure.
Torque the mounting bolts to the manufacturer's specifications (consult repair manual for exact torque values).

5. Reassemble and Lower Vehicle

Reinstall the wheels and hand-tighten the lug nuts.
Lower the vehicle from the jack stands using the jack and then fully tighten the lug nuts to the specified torque.

6. Final Inspection

Check all suspension components for proper installation.
Ensure no tools are left in the engine bay or under the vehicle.